[Wed May 22 22:25:19 2013] Detection parameters:
  Position = (249.0, 406.0) = 15 49 30.13 27 9 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.4 +/- 11.1
  Background counts = 20.4
  Rate = 0.003 +/- 0.0006

[Wed May 22 22:25:19 2013] Off-axis axis estimate = 8.59'
[Wed May 22 22:43:00 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:43:00 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Wed May 22 22:43:00 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Wed May 22 22:43:00 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.72"
[Wed May 22 22:50:10 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 22 22:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_src4.csv
[Wed May 22 22:50:10 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 22 22:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_src4.csv
[Wed May 22 22:50:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:50:10 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 22 22:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 22 22:50:10 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 22 22:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 22 22:50:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:50:14 2013] Source 3 is offset by -3.829912 and -8.204035 pixels which is larger than
2 X fitted extent = 1.232322 x 1.410359, not incorporating fit results
[Wed May 22 22:50:14 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:50:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:50:14 2013] Assessing source extent using major
[Wed May 22 22:50:14 2013] Source does appear to be extended
[Wed May 22 22:50:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 23:06:28 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Wed May 22 23:06:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 23:06:28 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Wed May 22 23:06:28 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Wed May 22 23:06:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.72"
[Wed May 22 23:12:28 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 22 23:12:28 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 22 23:12:28 2013] Fit fullrun_mos2_xmm0111870601_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed May 22 23:12:28 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 22 23:12:28 2013] fullrun_mos2_xmm0111870601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 22 23:12:28 2013] Fit fullrun_mos2_xmm0111870601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed May 22 23:12:32 2013] Spatial fit model total counts = 108.742000, observed total counts = 105.000000
[Wed May 22 23:12:32 2013] Offset between fit and detection position for source 3 = 0.299001 pixels
[Wed May 22 23:12:32 2013] 107.783400 total counts/ 76.951200 bgd. counts: snr = 3.514769
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.299001 pixels
  Position = (249.2, 406.2) = 15 49 30.06 27 9 60.0
  Extent = 5.5 (3.3-7.6)", rotation angle = 0
  Source counts = 30.8 +/- 10.4
  Background counts = 77.0
  Rate = 0.002 +/- 0.0007
[Wed May 22 23:12:32 2013] Vigneting correction estimate = 1.000000
[Wed May 22 23:12:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 23:12:32 2013] Assessing source extent using major axis lower bound
[Wed May 22 23:12:32 2013] Source does appear to be extended
[Wed May 22 23:12:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 23:23:09 2013] XMMSAS src. selection expression = ellipse(21628.239340, 35294.256600, 329.026809, 329.026809, 0.000000, X, Y)
[Wed May 22 23:23:09 2013] Writing source region out to fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3_src.reg
[Wed May 22 23:23:09 2013] Extracting stamp from image fullrun_mos2_xmm0111870601_pi300-10000_cl_sm2.00.img.gz, (230, 387) - (268, 425)
[Wed May 22 23:23:09 2013] XMMSAS bgd. selection expression = annulus(21628.239340, 35294.256600, 548.378016, 1096.756032, X, Y)
[Wed May 22 23:23:09 2013] Writing fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3.gif
[Wed May 22 23:23:51 2013] Mean detx,y = (8497.96, 5658.33) 
[Wed May 22 23:23:52 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 23:24:03 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 23:24:03 2013] Setting source spectrum file to fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 22 23:24:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 22 23:28:03 2013] Not generating rmf since there are only 30 counts
[Wed May 22 23:28:03 2013] rmf not generated due to insufficient counts
[Wed May 22 23:28:48 2013] Updating aperture counts using extracted products
[Wed May 22 23:28:48 2013] Total counts from fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 45.00
[Wed May 22 23:28:48 2013] Total counts from fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 97.00
[Wed May 22 23:28:48 2013] Got source and background scale factors 275648.000000, 2286720.000000
[Wed May 22 23:28:48 2013] User source parameters:
  Position = (249.2, 406.2) = 15 49 30.06 27 9 60.0
  Extent = 5.5 (3.3-7.6)", rotation angle = 0
  Source aperture counts = 33.3 +/- 7.8
  Background aperture counts = 11.7
  Rate = 0.002 +/- 0.0005

[Wed May 22 23:28:48 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 23:28:48 2013] Using photon index=1.80, rate=0.00209, arf fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3.arf
[Wed May 22 23:28:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 23:28:48 2013] Updating source flux to 5.7e-14
[Wed May 22 23:28:50 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed May 22 23:28:50 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 23:28:51 2013] xmm0111870601/analysis//spectral/fullrun_mos2_xmm0111870601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete