[Wed Jun 13 15:35:29 2012] Detection parameters:
  Position = (333.1, 322.1) = 15 58 15.08 27 14 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1612.0 +/- 66.7
  Background counts = 353.4
  Rate = 0.2 +/- 0.01

[Wed Jun 13 15:35:29 2012] Off-axis axis estimate = 3.05'
[Wed Jun 13 15:38:11 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 15:38:11 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Wed Jun 13 15:38:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.646
[Wed Jun 13 15:38:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.95"
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 13 16:47:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 13 16:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:52:02 2012] Spatial fit model total counts = 2549.540000, observed total counts = 2278.000000
[Wed Jun 13 18:52:02 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 18:52:02 2012] Source 7 is offset by -5.499366 and -3.376150 pixels which is larger than
2 X fitted extent = 0.815637 x 0.815637, not incorporating fit results
[Wed Jun 13 18:52:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:02 2012] Assessing source extent using major
[Wed Jun 13 18:52:02 2012] Source does appear to be extended
[Wed Jun 13 18:52:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:52:21 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 18:52:21 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Wed Jun 13 18:52:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.646
[Wed Jun 13 18:52:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.95"
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 20:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 13 20:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:44:02 2012] Spatial fit model total counts = 4611.010000, observed total counts = 3028.000000
[Wed Jun 13 21:44:02 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 21:44:02 2012] Source 7 is offset by 3.117990 and 5.150930 pixels which is larger than
2 X fitted extent = 1.559710 x 1.559710, not incorporating fit results
[Wed Jun 13 21:44:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:02 2012] Assessing source extent using major
[Wed Jun 13 21:44:02 2012] Source does appear to be extended
[Wed Jun 13 21:44:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:44:16 2012] Counts = 1611.971924, rescaling region sizes by 2.000000
[Wed Jun 13 21:44:16 2012] XMMSAS src. selection expression = ellipse(28934.705170, 27976.690948, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing source region out to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7_src.reg
[Wed Jun 13 21:44:16 2012] Extracting stamp from image fullrun_pn_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (258, 247) - (408, 397)
[Wed Jun 13 21:44:16 2012] XMMSAS bgd. selection expression = annulus(28934.705170, 27976.690948, 4350.000000, 8700.000000, X, Y) && !ellipse(29218.578247, 30053.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29617.599945, 28830.035950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28154.877930, 28284.480530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.200928, 27804.045013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24956.685394, 27198.815155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29568.773956, 26817.892792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.648987, 26834.173431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.213989, 26410.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29792.326000, 26355.662000, 1283.888037, 887.232026, 0.543000, X, Y) && !ellipse(26146.406677, 25889.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.468000, 25541.780000, 1044.064030, 1044.064030, 0.000000, X, Y) && !ellipse(29999.840000, 25757.556000, 1283.888037, 1283.888037, 0.000000, X, Y) && !ellipse(27356.369904, 27010.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.730194, 24664.552521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.310000, 25163.900000, 2088.128060, 2088.128060, 0.000000, X, Y) && !ellipse(24660.280579, 24645.757568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.710144, 24677.580750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.746613, 24232.247375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25117.572600, 31143.223400, 447.681613, 447.681613, 0.000000, X, Y) && !ellipse(28964.818512, 24975.331665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.188000, 24069.620000, 1219.992035, 1219.992035, 0.000000, X, Y) && !ellipse(25564.610107, 23699.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.501251, 23631.961182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.623383, 23187.952667, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7.gif
[Wed Jun 13 21:47:28 2012] Mean detx,y = (851.08, -1364.22) 
[Wed Jun 13 21:47:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:49:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:49:17 2012] Setting source spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jun 13 21:49:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jun 13 22:32:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 22:32:30 2012] rmf not generated due to insufficient counts
[Thu Jun 14 05:00:23 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:23 2012] Error reading totcts from fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.234, arf fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:24 2012] Updating source flux to 6.1e-13
[Thu Jun 14 05:02:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 05:03:44 2012] xmm0111870401/analysis//spectral/fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete