[Wed Jun 13 15:35:29 2012] Detection parameters:
  Position = (324.2, 325.7) = 15 58 18.00 27 14 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2239.7 +/- 62.5
  Background counts = 355.8
  Rate = 0.3 +/- 0.009

[Wed Jun 13 15:35:29 2012] Off-axis axis estimate = 2.72'
[Wed Jun 13 15:38:11 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 15:38:11 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Jun 13 15:38:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.858
[Wed Jun 13 15:38:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.79"
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src4.csv
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src4.csv
[Wed Jun 13 16:47:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 13 16:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:52:02 2012] Source 5 is offset by 2.340742 and 6.111776 pixels which is larger than
2 X fitted extent = 4.565490 x 0.997467, not incorporating fit results
[Wed Jun 13 18:52:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:02 2012] Assessing source extent using major
[Wed Jun 13 18:52:02 2012] Source does appear to be extended
[Wed Jun 13 18:52:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:52:21 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 18:52:21 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Jun 13 18:52:21 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.858
[Wed Jun 13 18:52:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.79"
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src2.csv
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src2.csv
[Wed Jun 13 20:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 13 20:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:44:02 2012] Source 5 is offset by 1.948811 and 5.747500 pixels which is larger than
2 X fitted extent = 0.895039 x 3.194768, not incorporating fit results
[Wed Jun 13 21:44:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:02 2012] Assessing source extent using major
[Wed Jun 13 21:44:02 2012] Source does appear to be extended
[Wed Jun 13 21:44:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:44:16 2012] Counts = 2239.676025, rescaling region sizes by 2.000000
[Wed Jun 13 21:44:16 2012] XMMSAS src. selection expression = ellipse(28154.877930, 28284.480530, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing source region out to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 13 21:44:16 2012] Extracting stamp from image fullrun_pn_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (249, 251) - (399, 401)
[Wed Jun 13 21:44:16 2012] XMMSAS bgd. selection expression = annulus(28154.877930, 28284.480530, 4350.000000, 8700.000000, X, Y) && !ellipse(29218.578247, 30053.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29617.599945, 28830.035950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.200928, 27804.045013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28934.705170, 27976.690948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24956.685394, 27198.815155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29568.773956, 26817.892792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.648987, 26834.173431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.213989, 26410.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29792.326000, 26355.662000, 1283.888037, 887.232026, 0.543000, X, Y) && !ellipse(26146.406677, 25889.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.468000, 25541.780000, 1044.064030, 1044.064030, 0.000000, X, Y) && !ellipse(29999.840000, 25757.556000, 1283.888037, 1283.888037, 0.000000, X, Y) && !ellipse(27356.369904, 27010.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.730194, 24664.552521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.310000, 25163.900000, 2088.128060, 2088.128060, 0.000000, X, Y) && !ellipse(24660.280579, 24645.757568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.710144, 24677.580750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.746613, 24232.247375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25117.572600, 31143.223400, 447.681613, 447.681613, 0.000000, X, Y) && !ellipse(28964.818512, 24975.331665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.188000, 24069.620000, 1219.992035, 1219.992035, 0.000000, X, Y) && !ellipse(25564.610107, 23699.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.501251, 23631.961182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.623383, 23187.952667, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5.gif
[Wed Jun 13 21:45:06 2012] Mean detx,y = (171.63, -1264.35) 
[Wed Jun 13 21:45:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:46:54 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:46:54 2012] Setting source spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 13 21:46:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 13 22:00:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 22:00:55 2012] rmf not generated due to insufficient counts
[Thu Jun 14 05:00:23 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:23 2012] Error reading totcts from fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.329, arf fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:24 2012] Updating source flux to 8.5e-13
[Thu Jun 14 05:02:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 05:03:44 2012] xmm0111870401/analysis//spectral/fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete