[Wed Jun 13 15:35:29 2012] Detection parameters:
  Position = (291.0, 294.0) = 15 58 28.83 27 12 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 387.8 +/- 37.2
  Background counts = 345.3
  Rate = 0.05 +/- 0.005

[Wed Jun 13 15:35:29 2012] Off-axis axis estimate = 0.63'
[Wed Jun 13 15:38:11 2012] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 15:38:11 2012] Initial guess for spatial extent in simple fitting = 6.74"
[Wed Jun 13 15:38:11 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.952
[Wed Jun 13 15:38:11 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 6.74"
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src12.csv
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src12.csv
[Wed Jun 13 16:47:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Jun 13 16:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:52:02 2012] Spatial fit model total counts = 2766.790000, observed total counts = 2768.000000
[Wed Jun 13 18:52:02 2012] Offset between fit and detection position for source 14 = 4.028052 pixels
[Wed Jun 13 18:52:02 2012] Warning, changing simple spatial fit ID from 12 to 11
[Wed Jun 13 18:52:02 2012] 2865.321000 total counts/ 2700.820000 bgd. counts: snr = 3.165343
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 4.028052 pixels
  Position = (295.0, 294.1) = 15 58 27.52 27 12 33.3
  Extent = 13.1 (13.0-26.1)", rotation angle = 0
  Source counts = 164.5 +/- 53.5
  Background counts = 2700.8
  Rate = 0.06 +/- 0.02
[Wed Jun 13 18:52:02 2012] Spatial fit model total counts = 1769.100000, observed total counts = 1576.000000
[Wed Jun 13 18:52:02 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 18:52:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:02 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 18:52:02 2012] Source does appear to be extended
[Wed Jun 13 18:52:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:52:02 2012] Source is confused with source 13
[Wed Jun 13 18:52:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 18:52:21 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Wed Jun 13 18:52:21 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 1.000
[Wed Jun 13 18:52:21 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.05"
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jun 13 20:07:50 2012] Fit fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jun 13 20:07:50 2012] Fit fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jun 13 21:44:02 2012] Warning, spatial fit 10 centroid is now closest to src. 20
[Wed Jun 13 21:44:02 2012] Source 14 is offset by 1.570851 and 4.067333 pixels which is larger than
2 X fitted extent = 0.803784 x 0.803784, not incorporating fit results
[Wed Jun 13 21:44:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:02 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 21:44:02 2012] Source does appear to be extended
[Wed Jun 13 21:44:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:44:16 2012] XMMSAS src. selection expression = ellipse(25616.468000, 25541.780000, 783.048023, 783.048023, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing source region out to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun 13 21:44:16 2012] Extracting stamp from image fullrun_pn_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (250, 249) - (340, 339)
[Wed Jun 13 21:44:16 2012] XMMSAS bgd. selection expression = annulus(25616.468000, 25541.780000, 1305.080038, 2610.160075, X, Y) && !ellipse(28154.877930, 28284.480530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.200928, 27804.045013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28934.705170, 27976.690948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24956.685394, 27198.815155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.648987, 26834.173431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.213989, 26410.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26146.406677, 25889.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27356.369904, 27010.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.730194, 24664.552521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.310000, 25163.900000, 2088.128060, 2088.128060, 0.000000, X, Y) && !ellipse(24660.280579, 24645.757568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.710144, 24677.580750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.746613, 24232.247375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.818512, 24975.331665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.188000, 24069.620000, 1219.992035, 1219.992035, 0.000000, X, Y) && !ellipse(25564.610107, 23699.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26608.501251, 23631.961182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.623383, 23187.952667, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src14.gif
[Wed Jun 13 21:51:53 2012] Mean detx,y = (-1169.24, 1881.73) 
[Wed Jun 13 21:51:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:52:05 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:52:05 2012] Setting source spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 13 21:52:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Jun 14 05:00:23 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:23 2012] Error reading totcts from fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.0586, arf fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src14.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:24 2012] Updating source flux to 1.7e-13
[Thu Jun 14 05:02:29 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Thu Jun 14 05:02:29 2012] Flag p found in src. 14 procflags, skipping spectral fitting
[Thu Jun 14 05:02:29 2012] Flag c found in src. 14 procflags, skipping spectral fitting