[Wed Jun 13 15:35:29 2012] Detection parameters:
  Position = (285.4, 309.0) = 15 58 30.65 27 13 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.4 +/- 20.1
  Background counts = 316.9
  Rate = 0.03 +/- 0.004

[Wed Jun 13 15:35:29 2012] Off-axis axis estimate = 1.22'
[Wed Jun 13 15:38:11 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 15:38:11 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Wed Jun 13 15:38:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.669
[Wed Jun 13 15:38:11 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.04"
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src8.csv
[Wed Jun 13 16:47:22 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jun 13 16:47:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src8.csv
[Wed Jun 13 16:47:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 13 16:47:23 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jun 13 16:47:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 13 16:47:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:52:02 2012] Source 10 is offset by -6.078242 and 2.617281 pixels which is larger than
2 X fitted extent = 5.844598 x 5.844598, not incorporating fit results
[Wed Jun 13 18:52:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:02 2012] Assessing source extent using major
[Wed Jun 13 18:52:02 2012] Source does appear to be extended
[Wed Jun 13 18:52:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:52:02 2012] Source is confused with source 8
[Wed Jun 13 18:52:02 2012] Source is confused with source 11
[Wed Jun 13 18:52:21 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 18:52:21 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Wed Jun 13 18:52:21 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.669
[Wed Jun 13 18:52:21 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.04"
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src6.csv
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src6.csv
[Wed Jun 13 20:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jun 13 20:07:50 2012] fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun 13 20:07:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jun 13 20:07:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:44:02 2012] Source 10 is offset by -6.078242 and 2.704775 pixels which is larger than
2 X fitted extent = 2.366064 x 6.470759, not incorporating fit results
[Wed Jun 13 21:44:02 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:02 2012] Assessing source extent using major
[Wed Jun 13 21:44:02 2012] Source does appear to be extended
[Wed Jun 13 21:44:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:44:16 2012] XMMSAS src. selection expression = ellipse(24780.648987, 26834.173431, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing source region out to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 13 21:44:16 2012] Extracting stamp from image fullrun_pn_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (248, 271) - (323, 346)
[Wed Jun 13 21:44:16 2012] XMMSAS bgd. selection expression = annulus(24780.648987, 26834.173431, 1087.500000, 2175.000000, X, Y) && !ellipse(25182.200928, 27804.045013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24956.685394, 27198.815155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.213989, 26410.821045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26146.406677, 25889.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.468000, 25541.780000, 1044.064030, 1044.064030, 0.000000, X, Y) && !ellipse(27356.369904, 27010.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25719.730194, 24664.552521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.310000, 25163.900000, 2088.128060, 2088.128060, 0.000000, X, Y) && !ellipse(24660.280579, 24645.757568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.710144, 24677.580750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.746613, 24232.247375, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 21:44:16 2012] Writing fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10.gif
[Wed Jun 13 21:50:21 2012] Mean detx,y = (-2473.02, 1038.36) 
[Wed Jun 13 21:50:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 21:50:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 21:50:37 2012] Setting source spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 13 21:50:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 13 23:09:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 23:09:13 2012] rmf not generated due to insufficient counts
[Thu Jun 14 05:00:23 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:23 2012] Error reading totcts from fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.0258, arf fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:24 2012] Updating source flux to 1.1e-13
[Thu Jun 14 05:02:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 05:03:44 2012] xmm0111870401/analysis//spectral/fullrun_pn_xmm0111870401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete