[Wed Jun 13 15:36:00 2012] Detection parameters:
  Position = (321.9, 285.2) = 15 58 18.75 27 11 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.2 +/- 25.3
  Background counts = 173.9
  Rate = 0.01 +/- 0.002

[Wed Jun 13 15:36:00 2012] Off-axis axis estimate = 1.95'
[Wed Jun 13 17:47:51 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 17:47:51 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Wed Jun 13 17:47:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Wed Jun 13 17:47:51 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.40"
[Wed Jun 13 18:51:54 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 13 18:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src18.csv
[Wed Jun 13 18:51:54 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 13 18:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src18.csv
[Wed Jun 13 18:51:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:51:54 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 13 18:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 13 18:51:54 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 13 18:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 13 18:51:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:52:13 2012] Source 23 is offset by -6.339254 and 6.026296 pixels which is larger than
2 X fitted extent = 3.187168 x 3.187168, not incorporating fit results
[Wed Jun 13 18:52:13 2012] Spatial fit model total counts = 1873.110000, observed total counts = 1852.000000
[Wed Jun 13 18:52:13 2012] Offset between fit and detection position for source 23 = 0.552821 pixels
[Wed Jun 13 18:52:13 2012] Warning, changing simple spatial fit ID from 18 to 21
[Wed Jun 13 18:52:13 2012] 1795.388800 total counts/ 1783.810000 bgd. counts: snr = 0.274151
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.552821 pixels
  Position = (322.4, 285.0) = 15 58 18.58 27 11 53.7
  Extent = 1.9" x 1.9", rotation angle = 0
  Source counts = 11.6 +/- 42.4
  Background counts = 1783.8
  Rate = 0.001 +/- 0.005
  Deleting source due to low Poisson probability