[Wed Jun 13 15:36:00 2012] Detection parameters:
  Position = (329.7, 313.8) = 15 58 16.21 27 13 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1277.4 +/- 48.1
  Background counts = 182.4
  Rate = 0.1 +/- 0.004

[Wed Jun 13 15:36:00 2012] Off-axis axis estimate = 2.52'
[Wed Jun 13 17:47:51 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 17:47:51 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Jun 13 17:47:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.924
[Wed Jun 13 17:47:51 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.69"
[Wed Jun 13 18:51:53 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 13 18:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 13 18:51:53 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 13 18:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src3.csv
[Wed Jun 13 18:51:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:51:54 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 13 18:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 13 18:51:54 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 13 18:51:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Jun 13 18:51:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:52:13 2012] Spatial fit model total counts = 6702.210000, observed total counts = 5748.000000
[Wed Jun 13 18:52:13 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 18:52:13 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:13 2012] Assessing source extent using major
[Wed Jun 13 18:52:13 2012] Source does appear to be extended
[Wed Jun 13 18:52:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:00:54 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 21:00:54 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Jun 13 21:00:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.924
[Wed Jun 13 21:00:54 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.69"
[Wed Jun 13 21:43:55 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 13 21:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 21:43:55 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 13 21:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 21:43:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:43:55 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 13 21:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 13 21:43:55 2012] fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 13 21:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jun 13 21:43:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:44:08 2012] Spatial fit model total counts = 6563.530000, observed total counts = 5748.000000
[Wed Jun 13 21:44:08 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 21:44:08 2012] Source 15 is offset by -8.166778 and -1.672108 pixels which is larger than
2 X fitted extent = 5.538207 x 5.538207, not incorporating fit results
[Wed Jun 13 21:44:08 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:08 2012] Assessing source extent using major
[Wed Jun 13 21:44:08 2012] Source does appear to be extended
[Wed Jun 13 21:44:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 04:29:21 2012] Counts = 1277.359619, rescaling region sizes by 2.000000
[Thu Jun 14 04:29:21 2012] XMMSAS src. selection expression = ellipse(28632.674347, 27248.368622, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 14 04:29:21 2012] Writing source region out to fullrun_mos2_xmm0111870401_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 14 04:29:21 2012] Extracting stamp from image fullrun_mos2_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (255, 239) - (405, 389)
[Thu Jun 14 04:29:21 2012] XMMSAS bgd. selection expression = annulus(28632.674347, 27248.368622, 4350.000000, 8700.000000, X, Y) && !ellipse(25124.805400, 31144.876200, 424.828812, 424.828812, 0.000000, X, Y) && !ellipse(27335.273600, 27005.578400, 1150.248033, 1150.248033, 0.000000, X, Y) && !ellipse(27151.786621, 25791.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29353.865265, 28566.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.002319, 25607.451660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29163.093445, 30052.230896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.198944, 29078.732544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.264282, 25541.349396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26596.718231, 25191.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25498.320000, 28808.480000, 1189.280034, 1189.280034, 0.000000, X, Y) && !ellipse(30025.454926, 29517.948730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.252228, 24241.866547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24518.874000, 25281.850000, 1091.408031, 1091.408031, 0.000000, X, Y) && !ellipse(29805.063599, 26668.074799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26268.997345, 28993.097229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.843781, 27264.774048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29087.937531, 25211.268188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30765.082367, 28049.380341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.990753, 24586.072510, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 04:29:21 2012] Writing fullrun_mos2_xmm0111870401_pi300-10000_pass1_cl_src15.gif
[Thu Jun 14 04:33:42 2012] Mean detx,y = (-551.14, 549.37) 
[Thu Jun 14 04:33:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 04:35:55 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 04:35:55 2012] Setting source spectrum file to fullrun_mos2_xmm0111870401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 14 04:35:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111870401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jun 14 04:44:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 04:44:33 2012] rmf not generated due to insufficient counts
[Thu Jun 14 05:00:25 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:25 2012] Error reading totcts from fullrun_mos2_xmm0111870401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 14 05:00:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:25 2012] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0111870401_pi300-10000_pass1_cl_src15.arf
[Thu Jun 14 05:00:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:25 2012] Updating source flux to 1e-12
[Thu Jun 14 05:01:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting