[Wed Jun 13 15:35:44 2012] Detection parameters:
  Position = (338.9, 319.6) = 15 58 13.19 27 14 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 479.8 +/- 33.6
  Background counts = 170.5
  Rate = 0.04 +/- 0.003

[Wed Jun 13 15:35:44 2012] Off-axis axis estimate = 3.31'
[Wed Jun 13 16:47:24 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:47:24 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Wed Jun 13 16:47:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.899
[Wed Jun 13 16:47:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.08"
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src5.csv
[Wed Jun 13 17:47:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 13 17:47:50 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 13 18:52:07 2012] Source 6 is offset by 7.359153 and 1.311338 pixels which is larger than
2 X fitted extent = 5.609150 x 5.609150, not incorporating fit results
[Wed Jun 13 18:52:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:07 2012] Assessing source extent using major
[Wed Jun 13 18:52:07 2012] Source does appear to be extended
[Wed Jun 13 18:52:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 20:07:51 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 20:07:51 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Wed Jun 13 20:07:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.899
[Wed Jun 13 20:07:51 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.08"
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src5.csv
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src5.csv
[Wed Jun 13 21:00:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 13 21:00:54 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jun 13 21:44:05 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Wed Jun 13 21:44:05 2012] Source 6 is offset by 6.357153 and 7.369540 pixels which is larger than
2 X fitted extent = 1.997761 x 1.997761, not incorporating fit results
[Wed Jun 13 21:44:05 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:05 2012] Assessing source extent using major
[Wed Jun 13 21:44:05 2012] Source does appear to be extended
[Wed Jun 13 21:44:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 21:44:05 2012] Source is confused with source 3
[Thu Jun 14 00:17:23 2012] XMMSAS src. selection expression = ellipse(29438.032349, 27752.717987, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing source region out to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src6_src.reg
[Thu Jun 14 00:17:23 2012] Extracting stamp from image fullrun_mos1_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (301, 282) - (376, 357)
[Thu Jun 14 00:17:23 2012] XMMSAS bgd. selection expression = annulus(29438.032349, 27752.717987, 1087.500000, 2175.000000, X, Y) && !ellipse(27454.639000, 27023.920600, 1169.736034, 1169.736034, 0.000000, X, Y) && !ellipse(28754.494000, 28170.264000, 2601.456075, 2601.456075, 0.000000, X, Y) && !ellipse(29483.952000, 28863.918000, 1300.728037, 1300.728037, 0.000000, X, Y) && !ellipse(28269.740000, 24981.508000, 1160.000033, 1160.000033, 0.000000, X, Y) && !ellipse(29187.234200, 30079.797000, 289.479208, 289.479208, 0.000000, X, Y) && !ellipse(26430.962097, 25456.571655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26289.656000, 26132.484000, 1043.352030, 1043.352030, 25.500000, X, Y) && !ellipse(27782.085266, 25281.135284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.175842, 25018.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30213.656000, 28435.847000, 1332.640038, 1332.640038, 0.000000, X, Y) && !ellipse(29380.612030, 26219.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25219.220000, 26196.341600, 2198.432063, 2198.432063, 0.000000, X, Y) && !ellipse(29443.448608, 25397.770721, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src6.gif
[Thu Jun 14 00:28:31 2012] Mean detx,y = (1556.35, 1150.95) 
[Thu Jun 14 00:28:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 00:28:37 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 00:28:37 2012] Setting source spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 14 00:28:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jun 14 03:43:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 03:43:51 2012] rmf not generated due to insufficient counts
[Thu Jun 14 05:00:24 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:24 2012] Error reading totcts from fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.0394, arf fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src6.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:24 2012] Updating source flux to 4.1e-13
[Thu Jun 14 05:00:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting