[Wed Jun 13 15:35:44 2012] Detection parameters:
  Position = (289.6, 358.7) = 15 58 29.29 27 17 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6474.8 +/- 97.9
  Background counts = 97.9
  Rate = 0.6 +/- 0.009

[Wed Jun 13 15:35:44 2012] Off-axis axis estimate = 4.42'
[Wed Jun 13 16:47:24 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:47:24 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jun 13 16:47:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Wed Jun 13 16:47:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.64"
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 17:47:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 17:47:50 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 18:52:07 2012] Spatial fit model total counts = 4326.500000, observed total counts = 4268.000000
[Wed Jun 13 18:52:07 2012] Offset between fit and detection position for source 27 = 0.254062 pixels
[Wed Jun 13 18:52:07 2012] 4348.140000 total counts/ 1415.650000 bgd. counts: snr = 77.939675
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.254062 pixels
  Position = (289.4, 358.6) = 15 58 29.35 27 17 13.5
  Extent = 5.1 (5.0-5.3)", rotation angle = 0
  Source counts = 2932.5 +/- 65.9
  Background counts = 1415.7
  Rate = 0.4 +/- 0.008
[Wed Jun 13 18:52:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:07 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 18:52:07 2012] Source does appear to be extended
[Wed Jun 13 18:52:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 20:07:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 20:07:51 2012] Initial guess for spatial extent in simple fitting = 5.13"
[Wed Jun 13 20:07:51 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.797
[Wed Jun 13 20:07:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.13"
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 21:00:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 21:00:54 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 21:44:05 2012] Spatial fit model total counts = 4323.490000, observed total counts = 4268.000000
[Wed Jun 13 21:44:05 2012] Offset between fit and detection position for source 27 = 0.000034 pixels
[Wed Jun 13 21:44:05 2012] 4344.970000 total counts/ 1412.500000 bgd. counts: snr = 78.026001
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.000034 pixels
  Position = (289.4, 358.6) = 15 58 29.35 27 17 13.5
  Extent = 5.1 (5.0-5.3)", rotation angle = 0
  Source counts = 2932.5 +/- 65.9
  Background counts = 1412.5
  Rate = 0.4 +/- 0.008
[Wed Jun 13 21:44:05 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:05 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 21:44:05 2012] Source does appear to be extended
[Wed Jun 13 21:44:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 00:17:23 2012] Counts = 2932.470000, rescaling region sizes by 2.000000
[Thu Jun 14 00:17:23 2012] XMMSAS src. selection expression = ellipse(25130.126400, 31145.790800, 617.028018, 617.028018, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing source region out to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27_src.reg
[Thu Jun 14 00:17:23 2012] Extracting stamp from image fullrun_mos1_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (254, 323) - (325, 394)
[Thu Jun 14 00:17:23 2012] XMMSAS bgd. selection expression = annulus(25130.126400, 31145.790800, 2056.760059, 4113.520118, X, Y) && !ellipse(27454.639000, 27023.920600, 1169.736034, 1169.736034, 0.000000, X, Y) && !ellipse(28754.494000, 28170.264000, 2601.456075, 2601.456075, 0.000000, X, Y) && !ellipse(29483.952000, 28863.918000, 1300.728037, 1300.728037, 0.000000, X, Y) && !ellipse(29438.032349, 27752.717987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.234200, 30079.797000, 289.479208, 289.479208, 0.000000, X, Y) && !ellipse(26289.656000, 26132.484000, 1043.352030, 1043.352030, 25.500000, X, Y) && !ellipse(25227.171814, 27002.712036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30213.656000, 28435.847000, 1332.640038, 1332.640038, 0.000000, X, Y) && !ellipse(25020.878693, 26483.425476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.612030, 26219.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25219.220000, 26196.341600, 2198.432063, 2198.432063, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27.gif
[Thu Jun 14 00:17:27 2012] Mean detx,y = (3182.96, -3990.71) 
[Thu Jun 14 00:17:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 00:17:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 00:17:58 2012] Setting source spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 00:17:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Jun 14 05:00:24 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:24 2012] Error reading totcts from fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.373, arf fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:24 2012] Updating source flux to 4.7e-12
[Thu Jun 14 05:01:45 2012] Reading fit data from xmm0111870401/analysis//spectral/fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27_pl.csv
[Thu Jun 14 05:01:45 2012] Spectral fit parameter nH value = 2.01658e+20
[Thu Jun 14 05:01:45 2012] Spectral fit parameter PhoIndex value = 1.79237
[Thu Jun 14 05:01:45 2012] Failed to get F(0.3-8.0) from xmm0111870401/analysis//spectral/fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 05:01:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:01:45 2012] Using Nh = 2e+20, photon index=1.79, rate=0.373, arf fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src27.arf
[Thu Jun 14 05:01:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:01:45 2012] Updating source flux to 4.8e-12