[Wed Jun 13 15:35:44 2012] Detection parameters:
  Position = (287.1, 300.0) = 15 58 30.11 27 12 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.4 +/- 24.8
  Background counts = 163.4
  Rate = 0.01 +/- 0.002

[Wed Jun 13 15:35:44 2012] Off-axis axis estimate = 0.83'
[Wed Jun 13 16:47:24 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:47:24 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Wed Jun 13 16:47:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Wed Jun 13 16:47:24 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 6.85"
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src19.csv
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src19.csv
[Wed Jun 13 17:47:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 13 17:47:50 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Jun 13 18:52:07 2012] Warning, spatial fit 19 centroid is now closest to src. 23
[Wed Jun 13 18:52:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:07 2012] Assessing source extent using major
[Wed Jun 13 18:52:07 2012] Source does appear to be extended
[Wed Jun 13 18:52:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:52:07 2012] Source is confused with source 9
[Wed Jun 13 18:52:07 2012] Source is confused with source 10
[Wed Jun 13 20:07:51 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 20:07:51 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Wed Jun 13 20:07:51 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Wed Jun 13 20:07:51 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 6.85"
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src17.csv
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src17.csv
[Wed Jun 13 21:00:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jun 13 21:00:54 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Jun 13 21:44:05 2012] Source 14 is offset by 1.190657 and -0.641245 pixels which is larger than
2 X fitted extent = 0.811949 x 0.811949, not incorporating fit results
[Wed Jun 13 21:44:05 2012] Spatial fit model total counts = 1848.050000, observed total counts = 1848.000000
[Wed Jun 13 21:44:05 2012] Offset between fit and detection position for source 14 = 3.781223 pixels
[Wed Jun 13 21:44:05 2012] Warning, changing simple spatial fit ID from 17 to 19
[Wed Jun 13 21:44:05 2012] 1833.413000 total counts/ 1554.650000 bgd. counts: snr = 7.069990
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 3.781223 pixels
  Position = (290.4, 301.7) = 15 58 29.01 27 13 6.0
  Extent = 27.5 (27.4-55.0)", rotation angle = 0
  Source counts = 278.8 +/- 42.8
  Background counts = 1554.7
  Rate = 0.04 +/- 0.005
[Wed Jun 13 21:44:05 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:05 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 21:44:05 2012] Source does appear to be extended
[Wed Jun 13 21:44:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 00:17:23 2012] XMMSAS src. selection expression = ellipse(25219.220000, 26196.341600, 1648.824047, 1648.824047, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing source region out to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src14_src.reg
[Thu Jun 14 00:17:23 2012] Extracting stamp from image fullrun_mos1_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (196, 207) - (385, 396)
[Thu Jun 14 00:17:24 2012] XMMSAS bgd. selection expression = annulus(25219.220000, 26196.341600, 2748.040079, 5496.080158, X, Y) && !ellipse(25130.126400, 31145.790800, 411.352012, 411.352012, 0.000000, X, Y) && !ellipse(27454.639000, 27023.920600, 1169.736034, 1169.736034, 0.000000, X, Y) && !ellipse(28754.494000, 28170.264000, 2601.456075, 2601.456075, 0.000000, X, Y) && !ellipse(29483.952000, 28863.918000, 1300.728037, 1300.728037, 0.000000, X, Y) && !ellipse(29438.032349, 27752.717987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28269.740000, 24981.508000, 1160.000033, 1160.000033, 0.000000, X, Y) && !ellipse(29187.234200, 30079.797000, 289.479208, 289.479208, 0.000000, X, Y) && !ellipse(26430.962097, 25456.571655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26289.656000, 26132.484000, 1043.352030, 1043.352030, 25.500000, X, Y) && !ellipse(27782.085266, 25281.135284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27033.175842, 25018.051086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25862.210000, 24992.210000, 1074.584031, 1074.584031, 0.000000, X, Y) && !ellipse(25227.171814, 27002.712036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30213.656000, 28435.847000, 1332.640038, 1332.640038, 0.000000, X, Y) && !ellipse(25020.878693, 26483.425476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29380.612030, 26219.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29443.448608, 25397.770721, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 00:17:24 2012] Writing fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src14.gif
[Thu Jun 14 00:30:30 2012] Mean detx,y = (-1213.80, -1805.77) 
[Thu Jun 14 00:30:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 00:31:09 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 00:31:09 2012] Setting source spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jun 14 00:31:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Jun 14 05:00:24 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:24 2012] Error reading totcts from fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Jun 14 05:00:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:25 2012] Using photon index=1.80, rate=0.0354, arf fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src14.arf
[Thu Jun 14 05:00:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:25 2012] Updating source flux to 3.4e-13
[Thu Jun 14 05:00:26 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Thu Jun 14 05:00:26 2012] Flag c found in src. 14 procflags, skipping spectral fitting