[Wed Jun 13 15:35:44 2012] Detection parameters:
  Position = (335.9, 345.5) = 15 58 14.17 27 16 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.2 +/- 28.0
  Background counts = 142.6
  Rate = 0.03 +/- 0.002

[Wed Jun 13 15:35:44 2012] Off-axis axis estimate = 4.36'
[Wed Jun 13 16:47:24 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:47:24 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Wed Jun 13 16:47:24 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Wed Jun 13 16:47:24 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.61"
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src8.csv
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jun 13 17:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src8.csv
[Wed Jun 13 17:47:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jun 13 17:47:50 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jun 13 17:47:50 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Jun 13 18:52:07 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.179704 pixels away
[Wed Jun 13 18:52:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:52:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:52:07 2012] Assessing source extent using major
[Wed Jun 13 18:52:07 2012] Source does appear to be extended
[Wed Jun 13 18:52:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 20:07:51 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 20:07:51 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Wed Jun 13 20:07:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Wed Jun 13 20:07:51 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.61"
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src7.csv
[Wed Jun 13 21:00:53 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 13 21:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src7.csv
[Wed Jun 13 21:00:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 13 21:00:54 2012] fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 13 21:00:54 2012] Fit fullrun_mos1_xmm0111870401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 13 21:44:05 2012] Spatial fit model total counts = 1500.230000, observed total counts = 1406.000000
[Wed Jun 13 21:44:05 2012] Offset between fit and detection position for source 1 = 0.766360 pixels
[Wed Jun 13 21:44:05 2012] 1385.830700 total counts/ 1295.090000 bgd. counts: snr = 2.521460
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.766360 pixels
  Position = (336.0, 346.3) = 15 58 14.13 27 16 20.2
  Extent = 3.6 (2.5-5.6)", rotation angle = 0
  Source counts = 90.7 +/- 37.2
  Background counts = 1295.1
  Rate = 0.01 +/- 0.005
[Wed Jun 13 21:44:05 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 21:44:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 21:44:05 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 21:44:05 2012] Source does appear to be extended
[Wed Jun 13 21:44:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 00:17:23 2012] XMMSAS src. selection expression = ellipse(29187.234200, 30079.797000, 217.109406, 217.109406, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing source region out to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 00:17:23 2012] Extracting stamp from image fullrun_mos1_xmm0111870401_pi300-10000_cl_sm2.00.img.gz, (324, 334) - (349, 359)
[Thu Jun 14 00:17:23 2012] XMMSAS bgd. selection expression = annulus(29187.234200, 30079.797000, 361.849010, 723.698021, X, Y) && !ellipse(28754.494000, 28170.264000, 2601.456075, 2601.456075, 0.000000, X, Y) && !ellipse(29483.952000, 28863.918000, 1300.728037, 1300.728037, 0.000000, X, Y) && !ellipse(30213.656000, 28435.847000, 1332.640038, 1332.640038, 0.000000, X, Y)
[Thu Jun 14 00:17:23 2012] Writing fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 00:28:49 2012] Mean detx,y = (3645.01, 167.37) 
[Thu Jun 14 00:28:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 00:28:54 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 00:28:55 2012] Setting source spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 00:28:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 03:50:39 2012] Not generating rmf since there are only 90 counts
[Thu Jun 14 03:50:39 2012] rmf not generated due to insufficient counts
[Thu Jun 14 05:00:24 2012] Updating aperture counts using extracted products
[Thu Jun 14 05:00:24 2012] Error reading totcts from fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 05:00:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 05:00:24 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0111870401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 05:00:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 05:00:25 2012] Updating source flux to 1.8e-13
[Thu Jun 14 05:00:26 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting