[Fri Oct 14 11:41:57 2011] Detection parameters:
  Position = (265.3, 310.2) = 22 9 23.47 -47 7 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.7 +/- 24.5
  Background counts = 82.1
  Rate = 0.007 +/- 0.0009

[Fri Oct 14 11:41:58 2011] Off-axis axis estimate = 2.55'
[Fri Oct 14 11:57:00 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 11:57:00 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Oct 14 11:57:00 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Fri Oct 14 11:57:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.70"
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Oct 14 14:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src3.csv
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Oct 14 14:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src3.csv
[Fri Oct 14 14:39:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 14:39:23 2011] Fit fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 14 17:11:23 2011] Source 3 is offset by -5.793588 and 6.000528 pixels which is larger than
2 X fitted extent = 1.546910 x 1.546910, not incorporating fit results
[Fri Oct 14 17:11:23 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:23 2011] Assessing source extent using major
[Fri Oct 14 17:11:23 2011] Source does appear to be extended
[Fri Oct 14 17:11:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:11:50 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:11:50 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Oct 14 17:11:50 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Fri Oct 14 17:11:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.70"
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Oct 14 17:22:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src3.csv
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Oct 14 17:22:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src3.csv
[Fri Oct 14 17:22:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 17:22:40 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 17:22:40 2011] Fit fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 14 18:21:58 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 32.022939 pixels away
[Fri Oct 14 18:21:58 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 28.654161 pixels away
[Fri Oct 14 18:21:58 2011] Source 3 is offset by -5.795657 and 6.000712 pixels which is larger than
2 X fitted extent = 1.586731 x 1.586731, not incorporating fit results
[Fri Oct 14 18:21:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:21:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:21:58 2011] Assessing source extent using major
[Fri Oct 14 18:21:58 2011] Source does appear to be extended
[Fri Oct 14 18:21:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 18:22:15 2011] XMMSAS src. selection expression = ellipse(23030.575806, 26937.947906, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct 14 18:22:15 2011] Writing source region out to fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src3_src.reg
[Fri Oct 14 18:22:15 2011] Extracting stamp from image fullrun_pn_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (228, 273) - (303, 348)
[Fri Oct 14 18:22:15 2011] XMMSAS bgd. selection expression = annulus(23030.575806, 26937.947906, 1087.500000, 2175.000000, X, Y) && !ellipse(24884.868600, 28328.377600, 888.608026, 888.608026, 0.000000, X, Y) && !ellipse(24789.277704, 27485.354256, 1158.680033, 382.561103, 95.770230, X, Y) && !ellipse(24547.774000, 24538.973200, 1617.484847, 1604.066446, 70.830829, X, Y)
[Fri Oct 14 18:22:15 2011] Writing fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src3.gif
[Fri Oct 14 18:48:06 2011] Mean detx,y = (1851.33, 2242.37) 
[Fri Oct 14 18:48:29 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 18:49:01 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 18:49:01 2011] Setting source spectrum file to fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Oct 14 18:49:01 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Oct 14 19:03:02 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Oct 14 19:03:02 2011] rmf not generated due to insufficient counts
[Fri Oct 14 20:21:54 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:55 2011] Error reading totcts from fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Oct 14 20:21:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:55 2011] Using photon index=1.80, rate=0.00708, arf fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src3.arf
[Fri Oct 14 20:21:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:55 2011] Updating source flux to 1.8e-14
[Fri Oct 14 20:24:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting