[Fri Oct 14 11:41:57 2011] Detection parameters:
  Position = (286.3, 323.0) = 22 9 14.52 -47 7 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.1 +/- 29.4
  Background counts = 79.8
  Rate = 0.01 +/- 0.001

[Fri Oct 14 11:41:58 2011] Off-axis axis estimate = 1.99'
[Fri Oct 14 11:57:00 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 11:57:00 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Fri Oct 14 11:57:00 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Fri Oct 14 11:57:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Oct 14 14:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src1.csv
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Oct 14 14:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src1.csv
[Fri Oct 14 14:39:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 14:39:23 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 14:39:23 2011] Fit fullrun_pn_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 17:11:23 2011] Spatial fit model total counts = 1923.380000, observed total counts = 1930.000000
[Fri Oct 14 17:11:23 2011] Offset between fit and detection position for source 1 = 3.212376 pixels
[Fri Oct 14 17:11:23 2011] 1797.527000 total counts/ 1169.810000 bgd. counts: snr = 18.352965
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.212376 pixels
  Position = (286.6, 326.2) = 22 9 14.39 -47 6 51.2
  Extent = 11.1 (9.5-12.6)", rotation angle = 0
  Source counts = 627.7 +/- 42.4
  Background counts = 1169.8
  Rate = 0.01 +/- 0.001
[Fri Oct 14 17:11:23 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:23 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:11:23 2011] Source does appear to be extended
[Fri Oct 14 17:11:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:11:23 2011] Source is confused with source 2
[Fri Oct 14 17:11:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:11:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 17:11:50 2011] Initial guess for spatial extent in simple fitting = 11.11"
[Fri Oct 14 17:11:50 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Fri Oct 14 17:11:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.11"
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Oct 14 17:22:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src1.csv
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Oct 14 17:22:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src1.csv
[Fri Oct 14 17:22:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 17:22:39 2011] fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 17:22:39 2011] Fit fullrun_pn_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 18:21:58 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Oct 14 18:21:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:21:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:21:58 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:21:58 2011] Source does appear to be extended
[Fri Oct 14 18:21:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 18:22:15 2011] XMMSAS src. selection expression = ellipse(24884.868600, 28328.377600, 666.456019, 666.456019, 0.000000, X, Y)
[Fri Oct 14 18:22:15 2011] Writing source region out to fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1_src.reg
[Fri Oct 14 18:22:15 2011] Extracting stamp from image fullrun_pn_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (248, 288) - (325, 364)
[Fri Oct 14 18:22:15 2011] XMMSAS bgd. selection expression = annulus(24884.868600, 28328.377600, 1110.760032, 2221.520064, X, Y) && !ellipse(24789.277704, 27485.354256, 1158.680033, 382.561103, 95.770230, X, Y) && !ellipse(23030.575806, 26937.947906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24547.774000, 24538.973200, 1617.484847, 1604.066446, 70.830829, X, Y)
[Fri Oct 14 18:22:15 2011] Writing fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1.gif
[Fri Oct 14 18:30:01 2011] Mean detx,y = (203.26, 3658.67) 
[Fri Oct 14 18:30:28 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 18:31:01 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 18:31:02 2011] Setting source spectrum file to fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct 14 18:31:02 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Oct 14 20:21:54 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:54 2011] Error reading totcts from fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct 14 20:21:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:55 2011] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1.arf
[Fri Oct 14 20:21:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:55 2011] Updating source flux to 4.5e-14
[Fri Oct 14 20:24:39 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Oct 14 20:25:40 2011] Reading fit data from xmm0111810101/analysis//spectral/fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Oct 14 20:25:40 2011] Spectral fit parameter nH value = 7.28623e+20
[Fri Oct 14 20:25:40 2011] Spectral fit parameter PhoIndex value = 3.07217
[Fri Oct 14 20:25:40 2011] Failed to get F(0.3-8.0) from xmm0111810101/analysis//spectral/fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 20:25:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:25:40 2011] Using Nh = 7.3e+20, photon index=3.07, rate=0.0149, arf fullrun_pn_xmm0111810101_pi300-10000_pass1_cl_src1.arf
[Fri Oct 14 20:25:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:25:40 2011] Updating source flux to 2.9e-14