[Fri Oct 14 11:42:04 2011] Detection parameters:
  Position = (346.1, 386.1) = 22 8 49.07 -47 2 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 685.3 +/- 31.9
  Background counts = 13.5
  Rate = 0.02 +/- 0.001

[Fri Oct 14 11:42:07 2011] Off-axis axis estimate = 7.23'
[Fri Oct 14 15:41:07 2011] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:41:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:41:07 2011] Initial guess for spatial extent in simple fitting = 10.05"
[Fri Oct 14 15:41:07 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.140
[Fri Oct 14 15:41:07 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.05"
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src2.csv
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src2.csv
[Fri Oct 14 17:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 14 17:11:19 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 14 17:11:40 2011] Spatial fit model total counts = 744.562000, observed total counts = 747.000000
[Fri Oct 14 17:11:40 2011] Offset between fit and detection position for source 5 = 0.265731 pixels
[Fri Oct 14 17:11:40 2011] 745.601000 total counts/ 267.922000 bgd. counts: snr = 29.183136
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.265731 pixels
  Position = (345.8, 386.2) = 22 8 49.18 -47 2 30.2
  Extent = 5.4 (5.0-5.8)", rotation angle = 0
  Source counts = 477.7 +/- 27.3
  Background counts = 267.9
  Rate = 0.01 +/- 0.0006
[Fri Oct 14 17:11:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:40 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:11:40 2011] Source does appear to be extended
[Fri Oct 14 17:11:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:38:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:38:26 2011] Initial guess for spatial extent in simple fitting = 5.39"
[Fri Oct 14 17:38:26 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.322
[Fri Oct 14 17:38:26 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 5.39"
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src2.csv
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src2.csv
[Fri Oct 14 18:21:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 14 18:21:55 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 14 18:22:07 2011] Spatial fit model total counts = 746.999000, observed total counts = 747.000000
[Fri Oct 14 18:22:07 2011] Offset between fit and detection position for source 5 = 0.004237 pixels
[Fri Oct 14 18:22:07 2011] 747.977000 total counts/ 266.898000 bgd. counts: snr = 29.447182
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.004237 pixels
  Position = (345.8, 386.2) = 22 8 49.18 -47 2 30.2
  Extent = 5.4 (4.9-5.8)", rotation angle = 0
  Source counts = 481.1 +/- 27.3
  Background counts = 266.9
  Rate = 0.01 +/- 0.0006
[Fri Oct 14 18:22:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:22:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:22:07 2011] Source does appear to be extended
[Fri Oct 14 18:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:36:54 2011] XMMSAS src. selection expression = ellipse(30037.616320, 33547.382800, 324.981009, 324.981009, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing source region out to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src5_src.reg
[Fri Oct 14 19:36:54 2011] Extracting stamp from image fullrun_mos2_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (327, 367) - (364, 405)
[Fri Oct 14 19:36:54 2011] XMMSAS bgd. selection expression = annulus(30037.616320, 33547.382800, 541.635016, 1083.270031, X, Y)
[Fri Oct 14 19:36:54 2011] Writing fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src5.gif
[Fri Oct 14 19:45:00 2011] Mean detx,y = (4521.25, -9133.75) 
[Fri Oct 14 19:45:03 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 19:45:11 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 19:45:11 2011] Setting source spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Oct 14 19:45:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Oct 14 20:21:55 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:55 2011] Error reading totcts from fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Oct 14 20:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:56 2011] Using photon index=1.80, rate=0.00986, arf fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src5.arf
[Fri Oct 14 20:21:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:56 2011] Updating source flux to 2.1e-13