[Fri Oct 14 11:42:04 2011] Detection parameters:
  Position = (315.3, 192.2) = 22 9 2.13 -47 16 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.2 +/- 40.7
  Background counts = 10.6
  Rate = 0.005 +/- 0.0008

[Fri Oct 14 11:42:07 2011] Off-axis axis estimate = 7.80'
[Fri Oct 14 15:41:07 2011] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:41:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:41:07 2011] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Oct 14 15:41:07 2011] source mask rpix=2.4, npix_max = 33, mask sum = 31, frac = 0.938
[Fri Oct 14 15:41:07 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.33"
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src4.csv
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src4.csv
[Fri Oct 14 17:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 14 17:11:19 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 14 17:11:40 2011] Spatial fit model total counts = 239.000000, observed total counts = 239.000000
[Fri Oct 14 17:11:40 2011] Offset between fit and detection position for source 4 = 2.553553 pixels
[Fri Oct 14 17:11:40 2011] 247.087700 total counts/ 157.140000 bgd. counts: snr = 7.175409
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.553553 pixels
  Position = (315.8, 194.7) = 22 9 1.91 -47 16 23.0
  Extent = 7.2 (5.9-8.7)", rotation angle = 0
  Source counts = 89.9 +/- 15.7
  Background counts = 157.1
  Rate = 0.002 +/- 0.0003
[Fri Oct 14 17:11:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:40 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:11:40 2011] Source does appear to be extended
[Fri Oct 14 17:11:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:38:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:38:26 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Oct 14 17:38:26 2011] source mask rpix=1.7, npix_max = 18, mask sum = 7, frac = 0.374
[Fri Oct 14 17:38:26 2011] Skipping simple spatial due to low active detector fraction
[Fri Oct 14 18:22:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:22:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:22:07 2011] Source does appear to be extended
[Fri Oct 14 18:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:36:54 2011] XMMSAS src. selection expression = ellipse(27427.400800, 16893.380200, 433.905878, 433.905878, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing source region out to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src4_src.reg
[Fri Oct 14 19:36:54 2011] Extracting stamp from image fullrun_mos2_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (291, 170) - (341, 220)
[Fri Oct 14 19:36:54 2011] XMMSAS bgd. selection expression = annulus(27427.400800, 16893.380200, 723.176463, 1446.352926, X, Y)
[Fri Oct 14 19:36:54 2011] Writing fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src4.gif
[Fri Oct 14 19:45:43 2011] Mean detx,y = (3564.41, 7199.70) 
[Fri Oct 14 19:45:45 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 19:46:12 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 19:46:12 2011] Setting source spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Oct 14 19:46:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Oct 14 19:58:12 2011] Not generating rmf since there are only 89 counts
[Fri Oct 14 19:58:12 2011] rmf not generated due to insufficient counts
[Fri Oct 14 20:21:56 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:56 2011] Error reading totcts from fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Oct 14 20:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:56 2011] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src4.arf
[Fri Oct 14 20:21:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:56 2011] Updating source flux to 3.4e-14
[Fri Oct 14 20:22:49 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting