[Fri Oct 14 11:42:06 2011] Detection parameters:
  Position = (223.7, 261.9) = 22 9 41.25 -47 11 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.2 +/- 16.6
  Background counts = 15.9
  Rate = 0.004 +/- 0.0004

[Fri Oct 14 11:42:07 2011] Off-axis axis estimate = 6.03'
[Fri Oct 14 15:41:07 2011] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:41:07 2011] Initial guess for spatial extent in simple fitting = 9.45"
[Fri Oct 14 15:41:07 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Fri Oct 14 15:41:07 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 9.45"
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src5.csv
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src5.csv
[Fri Oct 14 17:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 14 17:11:19 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 14 17:11:40 2011] Spatial fit model total counts = 305.395000, observed total counts = 306.000000
[Fri Oct 14 17:11:40 2011] Offset between fit and detection position for source 31 = 0.238775 pixels
[Fri Oct 14 17:11:40 2011] 307.814000 total counts/ 187.850000 bgd. counts: snr = 8.752766
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.238775 pixels
  Position = (223.9, 261.8) = 22 9 41.15 -47 11 30.9
  Extent = 5.7 (4.8-7.2)", rotation angle = 0
  Source counts = 120.0 +/- 17.5
  Background counts = 187.8
  Rate = 0.002 +/- 0.0004
[Fri Oct 14 17:11:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:40 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:11:40 2011] Source does appear to be extended
[Fri Oct 14 17:11:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:38:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:38:26 2011] Initial guess for spatial extent in simple fitting = 5.75"
[Fri Oct 14 17:38:26 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.205
[Fri Oct 14 17:38:26 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 5.75"
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src4.csv
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src4.csv
[Fri Oct 14 18:21:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 14 18:21:55 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 14 18:22:07 2011] Spatial fit model total counts = 307.004000, observed total counts = 308.000000
[Fri Oct 14 18:22:07 2011] Offset between fit and detection position for source 31 = 0.019696 pixels
[Fri Oct 14 18:22:07 2011] 310.239000 total counts/ 192.317000 bgd. counts: snr = 8.503271
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.019696 pixels
  Position = (223.9, 261.8) = 22 9 41.14 -47 11 31.0
  Extent = 5.7 (4.8-7.0)", rotation angle = 0
  Source counts = 117.9 +/- 17.6
  Background counts = 192.3
  Rate = 0.002 +/- 0.0004
[Fri Oct 14 18:22:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:22:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:22:07 2011] Source does appear to be extended
[Fri Oct 14 18:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:36:54 2011] XMMSAS src. selection expression = ellipse(19431.743200, 22728.146920, 340.949410, 340.949410, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing source region out to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src31_src.reg
[Fri Oct 14 19:36:54 2011] Extracting stamp from image fullrun_mos2_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (204, 242) - (244, 281)
[Fri Oct 14 19:36:54 2011] XMMSAS bgd. selection expression = annulus(19431.743200, 22728.146920, 568.249016, 1136.498033, X, Y)
[Fri Oct 14 19:36:54 2011] Writing fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src31.gif
[Fri Oct 14 19:46:16 2011] Mean detx,y = (-4952.74, 2170.79) 
[Fri Oct 14 19:46:17 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 19:46:25 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 19:46:25 2011] Setting source spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Oct 14 19:46:25 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Oct 14 20:21:56 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:56 2011] Error reading totcts from fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Oct 14 20:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:56 2011] Using photon index=1.80, rate=0.00242, arf fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src31.arf
[Fri Oct 14 20:21:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:56 2011] Updating source flux to 3.8e-14