[Fri Oct 14 11:42:05 2011] Detection parameters:
  Position = (265.6, 310.9) = 22 9 23.32 -47 7 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.4 +/- 20.8
  Background counts = 30.1
  Rate = 0.004 +/- 0.0005

[Fri Oct 14 11:42:07 2011] Off-axis axis estimate = 2.54'
[Fri Oct 14 15:41:07 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:41:07 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Oct 14 15:41:07 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Fri Oct 14 15:41:07 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.70"
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src6.csv
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src6.csv
[Fri Oct 14 17:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 14 17:11:19 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 14 17:11:40 2011] Source 23 is offset by -4.872509 and 5.858172 pixels which is larger than
2 X fitted extent = 2.141600 x 2.141600, not incorporating fit results
[Fri Oct 14 17:11:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:40 2011] Assessing source extent using major
[Fri Oct 14 17:11:40 2011] Source does appear to be extended
[Fri Oct 14 17:11:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:38:26 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:38:26 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Oct 14 17:38:26 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Fri Oct 14 17:38:26 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.70"
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src5.csv
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src5.csv
[Fri Oct 14 18:21:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 14 18:21:55 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 14 18:22:07 2011] Spatial fit model total counts = 896.998000, observed total counts = 897.000000
[Fri Oct 14 18:22:07 2011] Offset between fit and detection position for source 23 = 1.608497 pixels
[Fri Oct 14 18:22:07 2011] 894.712000 total counts/ 673.859000 bgd. counts: snr = 8.507830
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.608497 pixels
  Position = (265.1, 312.5) = 22 9 23.55 -47 7 50.8
  Extent = 10.0 (8.7-11.8)", rotation angle = 0
  Source counts = 220.9 +/- 29.9
  Background counts = 673.9
  Rate = 0.005 +/- 0.0006
[Fri Oct 14 18:22:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:22:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:22:07 2011] Source does appear to be extended
[Fri Oct 14 18:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:36:54 2011] XMMSAS src. selection expression = ellipse(23015.785100, 27135.712800, 599.750417, 599.750417, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing source region out to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src23_src.reg
[Fri Oct 14 19:36:54 2011] Extracting stamp from image fullrun_mos2_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (231, 278) - (300, 347)
[Fri Oct 14 19:36:54 2011] XMMSAS bgd. selection expression = annulus(23015.785100, 27135.712800, 999.584029, 1999.168058, X, Y) && !ellipse(24546.149600, 24549.435600, 1703.030449, 1527.866444, 10.588516, X, Y) && !ellipse(23627.973328, 24751.109131, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src23.gif
[Fri Oct 14 19:46:30 2011] Mean detx,y = (-1811.31, -2298.93) 
[Fri Oct 14 19:46:31 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 19:46:41 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 19:46:41 2011] Setting source spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Oct 14 19:46:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Oct 14 20:21:56 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:56 2011] Error reading totcts from fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Oct 14 20:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:56 2011] Using photon index=1.80, rate=0.00452, arf fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src23.arf
[Fri Oct 14 20:21:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:56 2011] Updating source flux to 4.5e-14
[Fri Oct 14 20:22:49 2011] Flag b found in src. 23 procflags, skipping spectral fitting