[Fri Oct 14 11:42:03 2011] Detection parameters:
  Position = (272.1, 285.1) = 22 9 20.55 -47 9 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 633.1 +/- 41.9
  Background counts = 29.8
  Rate = 0.01 +/- 0.0009

[Fri Oct 14 11:42:07 2011] Off-axis axis estimate = 2.14'
[Fri Oct 14 15:41:07 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:41:07 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Oct 14 15:41:07 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Fri Oct 14 15:41:07 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.50"
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Oct 14 17:11:19 2011] Fit fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Oct 14 17:11:19 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 17:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Oct 14 17:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:11:40 2011] Source 2 is offset by 6.782078 and -6.376648 pixels which is larger than
2 X fitted extent = 2.897942 x 7.081196, not incorporating fit results
[Fri Oct 14 17:11:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:40 2011] Assessing source extent using major
[Fri Oct 14 17:11:40 2011] Source does appear to be extended
[Fri Oct 14 17:11:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:38:26 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:38:26 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Oct 14 17:38:26 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Fri Oct 14 17:38:26 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.50"
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src3.csv
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src3.csv
[Fri Oct 14 18:21:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Oct 14 18:21:55 2011] fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 18:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Oct 14 18:21:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:22:07 2011] Spatial fit model total counts = 3435.750000, observed total counts = 10068.000000
[Fri Oct 14 18:22:07 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 14 18:22:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:22:07 2011] Assessing source extent using major
[Fri Oct 14 18:22:07 2011] Source does appear to be extended
[Fri Oct 14 18:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:36:54 2011] XMMSAS src. selection expression = ellipse(23627.973328, 24751.109131, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing source region out to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src2_src.reg
[Fri Oct 14 19:36:54 2011] Extracting stamp from image fullrun_mos2_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (235, 248) - (310, 323)
[Fri Oct 14 19:36:54 2011] XMMSAS bgd. selection expression = annulus(23627.973328, 24751.109131, 1087.500000, 2175.000000, X, Y) && !ellipse(24546.149600, 24549.435600, 1703.030449, 1527.866444, 10.588516, X, Y) && !ellipse(23015.785100, 27135.712800, 799.667223, 799.667223, 0.000000, X, Y) && !ellipse(26643.278000, 25721.518000, 1068.536031, 1068.536031, 0.000000, X, Y) && !ellipse(23641.476807, 23348.000488, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Oct 14 19:36:54 2011] Writing fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src2.gif
[Fri Oct 14 19:45:19 2011] Mean detx,y = (-730.34, 34.20) 
[Fri Oct 14 19:45:22 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 19:45:34 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 19:45:35 2011] Setting source spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Oct 14 19:45:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Oct 14 19:58:08 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Oct 14 19:58:08 2011] rmf not generated due to insufficient counts
[Fri Oct 14 20:21:55 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:56 2011] Error reading totcts from fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Oct 14 20:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:56 2011] Using photon index=1.80, rate=0.014, arf fullrun_mos2_xmm0111810101_pi300-10000_pass1_cl_src2.arf
[Fri Oct 14 20:21:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:56 2011] Updating source flux to 1.4e-13
[Fri Oct 14 20:22:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting