[Fri Oct 14 11:41:58 2011] Detection parameters:
  Position = (282.8, 282.8) = 22 9 16.01 -47 9 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182791.8 +/- 512.1
  Background counts = 20.3
  Rate = 4 +/- 0.01

[Fri Oct 14 11:42:02 2011] Off-axis axis estimate = 1.60'
[Fri Oct 14 14:39:23 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 14:39:23 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Oct 14 14:39:23 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Fri Oct 14 14:39:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Fri Oct 14 15:41:06 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Oct 14 15:41:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_src1.csv
[Fri Oct 14 15:41:06 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Oct 14 15:41:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_src1.csv
[Fri Oct 14 15:41:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:41:06 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 15:41:06 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 15:41:06 2011] Fit fullrun_mos1_xmm0111810101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 17:11:30 2011] Spatial fit model total counts = 154611.000000, observed total counts = 160310.000000
[Fri Oct 14 17:11:30 2011] Offset between fit and detection position for source 1 = 0.204171 pixels
[Fri Oct 14 17:11:30 2011] 154349.000000 total counts/ 25600.000000 bgd. counts: snr = 804.681250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.204171 pixels
  Position = (282.6, 282.7) = 22 9 16.08 -47 10 0.4
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 128749.0 +/- 392.9
  Background counts = 25600.0
  Rate = 3 +/- 0.008
[Fri Oct 14 17:11:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 17:11:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 17:11:30 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 17:11:30 2011] Source does appear to be extended
[Fri Oct 14 17:11:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 17:22:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 17:22:40 2011] Initial guess for spatial extent in simple fitting = 5.81"
[Fri Oct 14 17:22:40 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Fri Oct 14 17:22:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.81"
[Fri Oct 14 17:38:26 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Oct 14 17:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_src1.csv
[Fri Oct 14 17:38:26 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Oct 14 17:38:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_src1.csv
[Fri Oct 14 17:38:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 17:38:26 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 17:38:26 2011] fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 17:38:26 2011] Fit fullrun_mos1_xmm0111810101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 18:22:01 2011] Spatial fit model total counts = 153931.000000, observed total counts = 159857.000000
[Fri Oct 14 18:22:01 2011] Offset between fit and detection position for source 1 = 0.010942 pixels
[Fri Oct 14 18:22:01 2011] 154032.000000 total counts/ 25600.000000 bgd. counts: snr = 802.700000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010942 pixels
  Position = (282.6, 282.7) = 22 9 16.08 -47 10 0.4
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 128432.0 +/- 392.5
  Background counts = 25600.0
  Rate = 3 +/- 0.008
[Fri Oct 14 18:22:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:22:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:22:01 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:22:01 2011] Source does appear to be extended
[Fri Oct 14 18:22:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 19:06:18 2011] Counts = 128432.000000, rescaling region sizes by 3.000000
[Fri Oct 14 19:06:18 2011] XMMSAS src. selection expression = ellipse(24540.864600, 24546.087000, 1041.219030, 1041.219030, 0.000000, X, Y)
[Fri Oct 14 19:06:18 2011] Writing source region out to fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1_src.reg
[Fri Oct 14 19:06:18 2011] Extracting stamp from image fullrun_mos1_xmm0111810101_pi300-10000_cl_sm2.00.img.gz, (223, 223) - (342, 343)
[Fri Oct 14 19:06:18 2011] XMMSAS bgd. selection expression = annulus(24540.864600, 24546.087000, 5206.095150, 10412.190300, X, Y) && !ellipse(30055.725840, 33572.280000, 478.715536, 478.715536, 0.000000, X, Y) && !ellipse(27424.246400, 16904.287360, 544.144816, 544.144816, 0.000000, X, Y)
[Fri Oct 14 19:06:18 2011] Writing fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1.gif
[Fri Oct 14 19:06:38 2011] Mean detx,y = (286.92, -103.72) 
[Fri Oct 14 19:06:43 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 19:10:33 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 19:10:34 2011] Setting source spectrum file to fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct 14 19:10:34 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Oct 14 20:21:55 2011] Updating aperture counts using extracted products
[Fri Oct 14 20:21:55 2011] Error reading totcts from fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Oct 14 20:21:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:21:55 2011] Using photon index=1.80, rate=2.63, arf fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1.arf
[Fri Oct 14 20:21:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:21:55 2011] Updating source flux to 2.4e-11
[Fri Oct 14 20:22:49 2011] Reading fit data from xmm0111810101/analysis//spectral/fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Oct 14 20:22:49 2011] Spectral fit parameter nH value = 8.70389e+19
[Fri Oct 14 20:22:49 2011] Spectral fit parameter PhoIndex value = 1.78628
[Fri Oct 14 20:22:49 2011] Failed to get F(0.3-8.0) from xmm0111810101/analysis//spectral/fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 20:22:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 20:22:49 2011] Using Nh = 8.7e+19, photon index=1.79, rate=2.63, arf fullrun_mos1_xmm0111810101_pi300-10000_pass1_cl_src1.arf
[Fri Oct 14 20:22:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 20:22:49 2011] Updating source flux to 2.5e-11