[Tue Apr 10 13:06:26 2012] Detection parameters:
  Position = (345.3, 304.0) = 9 54 57.82 69 2 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 825.5 +/- 58.0
  Background counts = 1267.3
  Rate = 0.01 +/- 0.0007

[Tue Apr 10 13:06:26 2012] Off-axis axis estimate = 3.42'
[Tue Apr 10 13:06:46 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:06:46 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Tue Apr 10 13:06:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.889
[Tue Apr 10 13:06:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.14"
[Tue Apr 10 13:06:49 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Apr 10 13:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src5.csv
[Tue Apr 10 13:06:49 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Apr 10 13:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src5.csv
[Tue Apr 10 13:06:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:06:49 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Apr 10 13:06:49 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Apr 10 13:06:49 2012] Fit fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Apr 10 13:06:56 2012] Spatial fit model total counts = 10055.000000, observed total counts = 10120.000000
[Tue Apr 10 13:06:56 2012] Offset between fit and detection position for source 5 = 0.642072 pixels
[Tue Apr 10 13:06:56 2012] 9301.150000 total counts/ 7727.400000 bgd. counts: snr = 17.902721
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.642072 pixels
  Position = (345.8, 304.4) = 9 54 57.41 69 2 42.5
  Extent = 8.9 (8.8-9.4)", rotation angle = 0
  Source counts = 1573.8 +/- 96.4
  Background counts = 7727.4
  Rate = 0.01 +/- 0.0008
[Tue Apr 10 13:06:56 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:06:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:06:56 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:06:56 2012] Source does appear to be extended
[Tue Apr 10 13:06:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:07:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:07:15 2012] Initial guess for spatial extent in simple fitting = 8.93"
[Tue Apr 10 13:07:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Tue Apr 10 13:07:15 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.93"
[Tue Apr 10 13:07:16 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Apr 10 13:07:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src5.csv
[Tue Apr 10 13:07:16 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Apr 10 13:07:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src5.csv
[Tue Apr 10 13:07:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:07:19 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Apr 10 13:07:20 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Apr 10 13:07:20 2012] Fit fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Apr 10 13:07:31 2012] Spatial fit model total counts = 10082.700000, observed total counts = 10120.000000
[Tue Apr 10 13:07:31 2012] Offset between fit and detection position for source 5 = 0.021291 pixels
[Tue Apr 10 13:07:31 2012] 9330.000000 total counts/ 7718.100000 bgd. counts: snr = 18.347753
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.021291 pixels
  Position = (345.8, 304.4) = 9 54 57.43 69 2 42.5
  Extent = 9.1 (8.4-9.5)", rotation angle = 0
  Source counts = 1611.9 +/- 96.6
  Background counts = 7718.1
  Rate = 0.01 +/- 0.0008
[Tue Apr 10 13:07:31 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:31 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:07:31 2012] Source does appear to be extended
[Tue Apr 10 13:07:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:07:31 2012] Source is confused with source 4
[Tue Apr 10 13:07:46 2012] Counts = 1611.900000, rescaling region sizes by 2.000000
[Tue Apr 10 13:07:46 2012] XMMSAS src. selection expression = ellipse(30032.554400, 26436.432600, 1095.924225, 1095.924225, 0.000000, X, Y)
[Tue Apr 10 13:07:46 2012] Not overwriting source region fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src.reg
[Tue Apr 10 13:07:46 2012] Extracting stamp from image fullrun_pn_xmm0111800101_pi300-10000_cl_sm2.00.img.gz, (283, 241) - (409, 367)
[Tue Apr 10 13:07:46 2012] XMMSAS bgd. selection expression = annulus(30032.554400, 26436.432600, 3653.080749, 7306.161497, X, Y) && !ellipse(26194.922600, 27897.873200, 1739.006450, 1739.006450, 0.000000, X, Y) && !ellipse(27392.103400, 29459.448200, 536.136015, 536.136015, 0.000000, X, Y) && !ellipse(28533.602000, 28651.340000, 1270.552037, 1270.552037, 0.000000, X, Y) && !ellipse(29212.100000, 27745.472000, 2505.520072, 2505.520072, 0.000000, X, Y) && !ellipse(27727.893463, 25361.842865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28303.740200, 24642.508000, 1200.416035, 1200.416035, 0.000000, X, Y) && !ellipse(27127.046000, 24865.046000, 516.160015, 516.160015, 0.000000, X, Y) && !ellipse(26224.053898, 23873.611800, 1274.104837, 1274.104837, 0.000000, X, Y)
[Tue Apr 10 13:07:46 2012] Writing fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5.gif
[Tue Apr 10 13:08:08 2012] ../../xmm0111800101/products/events/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0111800101/products/events/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Tue Apr 10 13:08:13 2012] Mean detx,y = (2441.55, 3151.07) 
[Tue Apr 10 13:08:13 2012] ../../xmm0111800101/products/images/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0111800101/products/images/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Tue Apr 10 13:08:13 2012] ../../xmm0111800101/products/spectra/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0111800101/products/spectra/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Tue Apr 10 13:08:13 2012] Setting source spectrum file to fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Apr 10 13:08:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Apr 10 13:08:13 2012] ../../xmm0111800101/products/lightcurves/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0111800101/products/lightcurves/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Tue Apr 10 13:08:35 2012] fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Tue Apr 10 13:08:35 2012] fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Tue Apr 10 13:11:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:11:01 2012] Error reading totcts from fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Apr 10 13:11:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:11:01 2012] Using photon index=1.80, rate=0.0126, arf fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src5.arf
[Tue Apr 10 13:11:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:11:01 2012] Updating source flux to 3.8e-14
[Tue Apr 10 13:11:07 2012] Flag c found in src. 5 procflags, skipping spectral fitting