[Tue Apr 10 13:06:26 2012] Detection parameters: Position = (301.7, 321.1) = 9 55 33.13 69 3 56.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 698495.5 +/- 907.9 Background counts = 1694.5 Rate = 8 +/- 0.01 [Tue Apr 10 13:06:26 2012] Off-axis axis estimate = 1.66' [Tue Apr 10 13:06:46 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting [Tue Apr 10 13:06:46 2012] Initial guess for spatial extent in simple fitting = 7.26" [Tue Apr 10 13:06:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850 [Tue Apr 10 13:06:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26" [Tue Apr 10 13:06:48 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src1.ximg exists [Tue Apr 10 13:06:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src1.csv [Tue Apr 10 13:06:48 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src1_1.ximg exists [Tue Apr 10 13:06:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src1.csv [Tue Apr 10 13:06:48 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Apr 10 13:06:49 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue Apr 10 13:06:49 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue Apr 10 13:06:49 2012] Fit fullrun_pn_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Tue Apr 10 13:06:56 2012] Spatial fit model total counts = 588093.000000, observed total counts = 631151.000000 [Tue Apr 10 13:06:56 2012] Offset between fit and detection position for source 1 = 0.133207 pixels [Tue Apr 10 13:06:56 2012] 587820.000000 total counts/ 25600.000000 bgd. counts: snr = 3513.875000 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.133207 pixels Position = (301.7, 321.2) = 9 55 33.19 69 3 55.8 Extent = 7.2 (7.2-7.3)", rotation angle = 0 Source counts = 562220.0 +/- 766.7 Background counts = 25600.0 Rate = 4 +/- 0.006 [Tue Apr 10 13:06:56 2012] Vigneting correction estimate = 1.000000 [Tue Apr 10 13:06:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Apr 10 13:06:56 2012] Assessing source extent using major axis lower bound [Tue Apr 10 13:06:56 2012] Source does appear to be extended [Tue Apr 10 13:06:56 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Apr 10 13:07:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Apr 10 13:07:15 2012] Initial guess for spatial extent in simple fitting = 7.25" [Tue Apr 10 13:07:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.066 [Tue Apr 10 13:07:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25" [Tue Apr 10 13:07:16 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src1.ximg exists [Tue Apr 10 13:07:16 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src1_1.ximg exists [Tue Apr 10 13:07:16 2012] Fit fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_src1 appears to have run properly [Tue Apr 10 13:07:16 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue Apr 10 13:07:16 2012] fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue Apr 10 13:07:17 2012] Fit fullrun_pn_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue Apr 10 13:07:31 2012] Spatial fit model total counts = 588156.000000, observed total counts = 629406.000000 [Tue Apr 10 13:07:31 2012] Offset between fit and detection position for source 1 = 0.002519 pixels [Tue Apr 10 13:07:31 2012] 587930.000000 total counts/ 25600.000000 bgd. counts: snr = 3514.562500 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.002519 pixels Position = (301.6, 321.2) = 9 55 33.19 69 3 55.8 Extent = 7.2 (7.2-7.3)", rotation angle = 0 Source counts = 562330.0 +/- 766.8 Background counts = 25600.0 Rate = 4 +/- 0.006 [Tue Apr 10 13:07:31 2012] Vigneting correction estimate = 1.000000 [Tue Apr 10 13:07:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Apr 10 13:07:31 2012] Assessing source extent using major axis lower bound [Tue Apr 10 13:07:31 2012] Source does appear to be extended [Tue Apr 10 13:07:31 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Apr 10 13:07:46 2012] Counts = 562330.000000, rescaling region sizes by 3.000000 [Tue Apr 10 13:07:46 2012] XMMSAS src. selection expression = ellipse(26194.922600, 27897.873200, 1304.254838, 1304.254838, 0.000000, X, Y) [Tue Apr 10 13:07:46 2012] Not overwriting source region fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src.reg [Tue Apr 10 13:07:46 2012] Extracting stamp from image fullrun_pn_xmm0111800101_pi300-10000_cl_sm2.00.img.gz, (227, 246) - (377, 396) [Tue Apr 10 13:07:46 2012] XMMSAS bgd. selection expression = annulus(26194.922600, 27897.873200, 6521.274188, 13042.548375, X, Y) && !ellipse(27392.103400, 29459.448200, 536.136015, 536.136015, 0.000000, X, Y) && !ellipse(28533.602000, 28651.340000, 1270.552037, 1270.552037, 0.000000, X, Y) && !ellipse(29212.100000, 27745.472000, 2505.520072, 2505.520072, 0.000000, X, Y) && !ellipse(30032.554400, 26436.432600, 730.616150, 730.616150, 0.000000, X, Y) && !ellipse(27727.893463, 25361.842865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28303.740200, 24642.508000, 1200.416035, 1200.416035, 0.000000, X, Y) && !ellipse(27127.046000, 24865.046000, 516.160015, 516.160015, 0.000000, X, Y) && !ellipse(26224.053898, 23873.611800, 1274.104837, 1274.104837, 0.000000, X, Y) [Tue Apr 10 13:07:46 2012] Writing fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1.gif [Tue Apr 10 13:07:46 2012] ../../xmm0111800101/products/events/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0111800101/products/events/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create [Tue Apr 10 13:07:52 2012] Mean detx,y = (221.24, -47.41) [Tue Apr 10 13:07:52 2012] ../../xmm0111800101/products/images/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0111800101/products/images/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create [Tue Apr 10 13:07:52 2012] ../../xmm0111800101/products/spectra/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0111800101/products/spectra/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create [Tue Apr 10 13:07:52 2012] Setting source spectrum file to fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue Apr 10 13:07:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Tue Apr 10 13:07:52 2012] ../../xmm0111800101/products/lightcurves/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0111800101/products/lightcurves/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create [Tue Apr 10 13:08:35 2012] fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create [Tue Apr 10 13:08:35 2012] fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create [Tue Apr 10 13:11:01 2012] Updating aperture counts using extracted products [Tue Apr 10 13:11:01 2012] Error reading totcts from fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue Apr 10 13:11:01 2012] Calculating source flux in energy range 0.30-8.00 [Tue Apr 10 13:11:01 2012] Using photon index=1.80, rate=4.39, arf fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1.arf [Tue Apr 10 13:11:01 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Apr 10 13:11:01 2012] Updating source flux to 1e-11 [Tue Apr 10 13:11:08 2012] Reading fit data from xmm0111800101/analysis//spectral/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_pl.csv [Tue Apr 10 13:11:08 2012] Spectral fit parameter nH value = 3.61079e+20 [Tue Apr 10 13:11:08 2012] Spectral fit parameter PhoIndex value = 1.83106 [Tue Apr 10 13:11:08 2012] Failed to get F(0.3-8.0) from xmm0111800101/analysis//spectral/fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Tue Apr 10 13:11:08 2012] Calculating source flux in energy range 0.30-8.00 [Tue Apr 10 13:11:08 2012] Using Nh = 3.6e+20, photon index=1.83, rate=4.39, arf fullrun_pn_xmm0111800101_pi300-10000_pass1_cl_src1.arf [Tue Apr 10 13:11:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Apr 10 13:11:08 2012] Updating source flux to 1.1e-11