[Tue Apr 10 13:06:27 2012] Detection parameters:
  Position = (315.9, 358.9) = 9 55 21.55 69 6 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.7 +/- 18.0
  Background counts = 42.0
  Rate = 0.002 +/- 0.0002

[Tue Apr 10 13:06:29 2012] Off-axis axis estimate = 4.56'
[Tue Apr 10 13:06:49 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:06:49 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Tue Apr 10 13:06:49 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Tue Apr 10 13:06:49 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.71"
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src27.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src27.csv
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src27.csv
[Tue Apr 10 13:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:06:53 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Apr 10 13:06:53 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Apr 10 13:06:53 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Apr 10 13:07:06 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 10.488658 pixels away
[Tue Apr 10 13:07:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:06 2012] Assessing source extent using major
[Tue Apr 10 13:07:06 2012] Source does appear to be extended
[Tue Apr 10 13:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:07:26 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:07:26 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Tue Apr 10 13:07:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Tue Apr 10 13:07:26 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.71"
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src27.ximg exists
[Tue Apr 10 13:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src27.csv
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Apr 10 13:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src27.csv
[Tue Apr 10 13:07:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Apr 10 13:07:28 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Apr 10 13:07:38 2012] Warning, spatial fit 27 centroid is now closest to src. 42
[Tue Apr 10 13:07:38 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:38 2012] Assessing source extent using major
[Tue Apr 10 13:07:38 2012] Source does appear to be extended
[Tue Apr 10 13:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:08:36 2012] XMMSAS src. selection expression = ellipse(27439.005035, 31171.636383, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 13:08:36 2012] Not overwriting source region fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src.reg
[Tue Apr 10 13:08:36 2012] Extracting stamp from image fullrun_mos2_xmm0111800101_pi300-10000_cl_sm2.00.img.gz, (278, 321) - (353, 396)
[Tue Apr 10 13:08:36 2012] XMMSAS bgd. selection expression = annulus(27439.005035, 31171.636383, 1087.500000, 2175.000000, X, Y) && !ellipse(26207.360220, 27892.556000, 1502.954443, 1502.954443, 0.000000, X, Y) && !ellipse(28654.004960, 29240.012400, 380.743833, 380.743833, 0.000000, X, Y) && !ellipse(29748.398892, 32483.781700, 401.387521, 343.164325, 42.591265, X, Y) && !ellipse(27396.705400, 29430.813400, 443.332813, 443.332813, 0.000000, X, Y) && !ellipse(24889.706000, 30155.530000, 806.992023, 806.992023, 0.000000, X, Y) && !ellipse(27051.638916, 28249.378387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26224.926514, 29376.132996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25887.332700, 31125.137000, 409.320012, 409.320012, 0.000000, X, Y) && !ellipse(28678.578560, 33615.192000, 541.684816, 541.684816, 0.000000, X, Y) && !ellipse(26074.734000, 30074.600000, 1255.408036, 1255.408036, 0.000000, X, Y)
[Tue Apr 10 13:08:36 2012] Writing fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36.gif
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Tue Apr 10 13:08:38 2012] Mean detx,y = (-2788.04, 2078.31) 
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src.img and ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Tue Apr 10 13:08:38 2012] Setting source spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Apr 10 13:08:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Tue Apr 10 13:08:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 13:08:46 2012] rmf not generated due to insufficient counts
[Tue Apr 10 13:08:46 2012] fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Tue Apr 10 13:11:02 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:11:02 2012] Error reading totcts from fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Apr 10 13:11:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:11:03 2012] Using photon index=1.80, rate=0.00213, arf fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src36.arf
[Tue Apr 10 13:11:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:11:03 2012] Updating source flux to 2.6e-14
[Tue Apr 10 13:11:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting