[Tue Apr 10 13:06:27 2012] Detection parameters:
  Position = (257.9, 443.7) = 9 56 8.93 69 12 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 13.2
  Background counts = 20.5
  Rate = 0.001 +/- 0.0002

[Tue Apr 10 13:06:29 2012] Off-axis axis estimate = 10.93'
[Tue Apr 10 13:06:49 2012] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:06:49 2012] Initial guess for spatial extent in simple fitting = 11.89"
[Tue Apr 10 13:06:49 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.004
[Tue Apr 10 13:06:49 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 11.89"
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src57.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src57.csv
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src57_1.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src57.csv
[Tue Apr 10 13:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:06:53 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Tue Apr 10 13:06:53 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Tue Apr 10 13:06:53 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Tue Apr 10 13:07:06 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.602131 pixels away
[Tue Apr 10 13:07:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:06 2012] Assessing source extent using major
[Tue Apr 10 13:07:06 2012] Source does appear to be extended
[Tue Apr 10 13:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:07:26 2012] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:07:26 2012] Initial guess for spatial extent in simple fitting = 11.89"
[Tue Apr 10 13:07:26 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.004
[Tue Apr 10 13:07:26 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 11.89"
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src49.ximg exists
[Tue Apr 10 13:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src49.csv
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src49_1.ximg exists
[Tue Apr 10 13:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src49.csv
[Tue Apr 10 13:07:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:07:29 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Tue Apr 10 13:07:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Tue Apr 10 13:07:29 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Tue Apr 10 13:07:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Tue Apr 10 13:07:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:07:38 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 15.811576 pixels away
[Tue Apr 10 13:07:38 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:38 2012] Assessing source extent using major
[Tue Apr 10 13:07:38 2012] Source does appear to be extended
[Tue Apr 10 13:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:08:37 2012] XMMSAS src. selection expression = ellipse(22387.766663, 38549.851288, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 13:08:37 2012] Not overwriting source region fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src.reg
[Tue Apr 10 13:08:37 2012] Extracting stamp from image fullrun_mos2_xmm0111800101_pi300-10000_cl_sm2.00.img.gz, (220, 406) - (295, 481)
[Tue Apr 10 13:08:37 2012] XMMSAS bgd. selection expression = annulus(22387.766663, 38549.851288, 1087.500000, 2175.000000, X, Y)
[Tue Apr 10 13:08:37 2012] Writing fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19.gif
[Tue Apr 10 13:08:43 2012] ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue Apr 10 13:08:43 2012] Mean detx,y = (-2274.49, 11035.56) 
[Tue Apr 10 13:08:43 2012] ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src.img and ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue Apr 10 13:08:43 2012] ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Tue Apr 10 13:08:43 2012] Setting source spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 13:08:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Apr 10 13:08:43 2012] ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue Apr 10 13:08:46 2012] Not generating rmf since there are only 87 counts
[Tue Apr 10 13:08:46 2012] rmf not generated due to insufficient counts
[Tue Apr 10 13:08:46 2012] fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Tue Apr 10 13:11:02 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:11:02 2012] Error reading totcts from fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Apr 10 13:11:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:11:04 2012] Using photon index=1.80, rate=0.00105, arf fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src19.arf
[Tue Apr 10 13:11:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:11:04 2012] Updating source flux to 2.2e-14
[Tue Apr 10 13:11:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting