[Tue Apr 10 13:06:27 2012] Detection parameters:
  Position = (281.6, 248.0) = 9 55 49.37 68 58 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.4 +/- 25.3
  Background counts = 30.8
  Rate = 0.006 +/- 0.0004

[Tue Apr 10 13:06:29 2012] Off-axis axis estimate = 3.85'
[Tue Apr 10 13:06:49 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:06:49 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Tue Apr 10 13:06:49 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Tue Apr 10 13:06:49 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.35"
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src15.csv
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src15.csv
[Tue Apr 10 13:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:06:52 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Apr 10 13:06:52 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Apr 10 13:06:52 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Apr 10 13:07:06 2012] Spatial fit model total counts = 681.688000, observed total counts = 689.000000
[Tue Apr 10 13:07:06 2012] Offset between fit and detection position for source 15 = 0.037201 pixels
[Tue Apr 10 13:07:06 2012] 702.663000 total counts/ 458.922000 bgd. counts: snr = 11.377822
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.037201 pixels
  Position = (281.7, 248.0) = 9 55 49.35 68 58 37.3
  Extent = 4.3 (3.6-4.6)", rotation angle = 0
  Source counts = 243.7 +/- 26.5
  Background counts = 458.9
  Rate = 0.003 +/- 0.0003
[Tue Apr 10 13:07:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:06 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:07:06 2012] Source does appear to be extended
[Tue Apr 10 13:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:07:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:07:26 2012] Initial guess for spatial extent in simple fitting = 4.26"
[Tue Apr 10 13:07:26 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.686
[Tue Apr 10 13:07:26 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 4.26"
[Tue Apr 10 13:07:27 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src15.ximg exists
[Tue Apr 10 13:07:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src15.csv
[Tue Apr 10 13:07:27 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Apr 10 13:07:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src15.csv
[Tue Apr 10 13:07:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Apr 10 13:07:28 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Apr 10 13:07:38 2012] Spatial fit model total counts = 687.314000, observed total counts = 689.000000
[Tue Apr 10 13:07:38 2012] Offset between fit and detection position for source 15 = 0.010992 pixels
[Tue Apr 10 13:07:38 2012] 709.083000 total counts/ 470.056000 bgd. counts: snr = 11.024837
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.010992 pixels
  Position = (281.7, 248.0) = 9 55 49.34 68 58 37.3
  Extent = 4.2 (3.7-4.5)", rotation angle = 0
  Source counts = 239.0 +/- 26.6
  Background counts = 470.1
  Rate = 0.003 +/- 0.0003
[Tue Apr 10 13:07:38 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:38 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:07:38 2012] Source does appear to be extended
[Tue Apr 10 13:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:08:36 2012] XMMSAS src. selection expression = ellipse(24458.343400, 21528.233000, 250.163407, 250.163407, 0.000000, X, Y)
[Tue Apr 10 13:08:36 2012] Not overwriting source region fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src.reg
[Tue Apr 10 13:08:36 2012] Extracting stamp from image fullrun_mos2_xmm0111800101_pi300-10000_cl_sm2.00.img.gz, (267, 234) - (296, 262)
[Tue Apr 10 13:08:36 2012] XMMSAS bgd. selection expression = annulus(24458.343400, 21528.233000, 416.939012, 833.878024, X, Y) && !ellipse(25077.815796, 22107.683640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23002.344760, 21794.376360, 1368.216039, 1368.216039, 0.000000, X, Y)
[Tue Apr 10 13:08:36 2012] Writing fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15.gif
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Apr 10 13:08:38 2012] Mean detx,y = (4716.72, -4614.42) 
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src.img and ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Apr 10 13:08:38 2012] Setting source spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Apr 10 13:08:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Apr 10 13:08:38 2012] ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Apr 10 13:08:46 2012] fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15.rmf exists, delete to re-create
[Tue Apr 10 13:08:46 2012] fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Tue Apr 10 13:11:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:11:01 2012] Error reading totcts from fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Apr 10 13:11:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:11:02 2012] Using photon index=1.80, rate=0.00294, arf fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src15.arf
[Tue Apr 10 13:11:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:11:03 2012] Updating source flux to 5.4e-14