[Tue Apr 10 13:06:27 2012] Detection parameters:
  Position = (330.1, 336.7) = 9 55 10.10 69 5 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1256.0 +/- 44.4
  Background counts = 43.3
  Rate = 0.02 +/- 0.0006

[Tue Apr 10 13:06:29 2012] Off-axis axis estimate = 3.60'
[Tue Apr 10 13:06:49 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:06:49 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Tue Apr 10 13:06:49 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Tue Apr 10 13:06:49 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.23"
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src7.csv
[Tue Apr 10 13:06:50 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Apr 10 13:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src7.csv
[Tue Apr 10 13:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:06:51 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Apr 10 13:06:51 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Apr 10 13:06:51 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Apr 10 13:07:06 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Tue Apr 10 13:07:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:06 2012] Assessing source extent using major
[Tue Apr 10 13:07:06 2012] Source does appear to be extended
[Tue Apr 10 13:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:07:26 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:07:26 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Tue Apr 10 13:07:26 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Tue Apr 10 13:07:26 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.23"
[Tue Apr 10 13:07:27 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Apr 10 13:07:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src7.csv
[Tue Apr 10 13:07:27 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Apr 10 13:07:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src7.csv
[Tue Apr 10 13:07:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Apr 10 13:07:28 2012] fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Apr 10 13:07:28 2012] Fit fullrun_mos2_xmm0111800101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Apr 10 13:07:38 2012] Spatial fit model total counts = 1781.000000, observed total counts = 1781.000000
[Tue Apr 10 13:07:38 2012] Offset between fit and detection position for source 10 = 0.178153 pixels
[Tue Apr 10 13:07:38 2012] 1741.362000 total counts/ 899.973000 bgd. counts: snr = 28.046721
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.178153 pixels
  Position = (329.9, 336.6) = 9 55 10.23 69 5 2.8
  Extent = 4.8 (4.5-5.1)", rotation angle = 0
  Source counts = 841.4 +/- 41.7
  Background counts = 900.0
  Rate = 0.01 +/- 0.0005
[Tue Apr 10 13:07:38 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:07:38 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:07:38 2012] Source does appear to be extended
[Tue Apr 10 13:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:08:36 2012] XMMSAS src. selection expression = ellipse(28654.004960, 29240.012400, 285.557875, 285.557875, 0.000000, X, Y)
[Tue Apr 10 13:08:36 2012] Not overwriting source region fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src.reg
[Tue Apr 10 13:08:36 2012] Extracting stamp from image fullrun_mos2_xmm0111800101_pi300-10000_cl_sm2.00.img.gz, (314, 320) - (346, 353)
[Tue Apr 10 13:08:36 2012] XMMSAS bgd. selection expression = annulus(28654.004960, 29240.012400, 475.929791, 951.859582, X, Y) && !ellipse(26207.360220, 27892.556000, 1502.954443, 1502.954443, 0.000000, X, Y) && !ellipse(27396.705400, 29430.813400, 443.332813, 443.332813, 0.000000, X, Y) && !ellipse(27224.054000, 27634.914000, 1340.520039, 1340.520039, 0.000000, X, Y) && !ellipse(27051.638916, 28249.378387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.366000, 26956.698000, 1525.600044, 1525.600044, 0.000000, X, Y)
[Tue Apr 10 13:08:36 2012] Writing fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10.gif
[Tue Apr 10 13:08:37 2012] ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0111800101/products/events/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 13:08:37 2012] Mean detx,y = (-2854.55, -181.57) 
[Tue Apr 10 13:08:37 2012] ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0111800101/products/images/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 13:08:37 2012] ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0111800101/products/spectra/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Apr 10 13:08:37 2012] Setting source spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 13:08:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Apr 10 13:08:37 2012] ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0111800101/products/lightcurves/fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 13:08:46 2012] fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create
[Tue Apr 10 13:08:46 2012] fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Tue Apr 10 13:11:01 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:11:01 2012] Error reading totcts from fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Apr 10 13:11:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:11:02 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0111800101_pi300-10000_pass1_cl_src10.arf
[Tue Apr 10 13:11:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:11:02 2012] Updating source flux to 1.3e-13