[Tue Mar 13 11:28:39 2012] Detection parameters:
  Position = (275.4, 343.1) = 22 35 47.89 -25 58 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 603.9 +/- 30.8
  Background counts = 31.5
  Rate = 0.02 +/- 0.0008

[Tue Mar 13 11:28:44 2012] Off-axis axis estimate = 3.64'
[Tue Mar 13 11:29:40 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:29:40 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Tue Mar 13 11:29:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.871
[Tue Mar 13 11:29:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.25"
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 11:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:29:44 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 11:29:44 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:29:45 2012] Fit fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 13 11:30:28 2012] Spatial fit model total counts = 782.000000, observed total counts = 782.000000
[Tue Mar 13 11:30:28 2012] Offset between fit and detection position for source 6 = 0.202007 pixels
[Tue Mar 13 11:30:28 2012] 779.509000 total counts/ 387.852000 bgd. counts: snr = 19.887165
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.202007 pixels
  Position = (275.2, 343.2) = 22 35 47.95 -25 58 36.0
  Extent = 5.1 (4.6-5.5)", rotation angle = 0
  Source counts = 391.7 +/- 27.9
  Background counts = 387.9
  Rate = 0.009 +/- 0.0007
[Tue Mar 13 11:30:28 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:30:28 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:30:28 2012] Source does appear to be extended
[Tue Mar 13 11:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:30:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:30:58 2012] Initial guess for spatial extent in simple fitting = 5.07"
[Tue Mar 13 11:30:58 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.082
[Tue Mar 13 11:30:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.07"
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 11:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:31:00 2012] Fit fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Mar 13 11:31:32 2012] Spatial fit model total counts = 781.999000, observed total counts = 782.000000
[Tue Mar 13 11:31:32 2012] Offset between fit and detection position for source 6 = 0.000000 pixels
[Tue Mar 13 11:31:32 2012] 779.508000 total counts/ 387.854000 bgd. counts: snr = 19.886961
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000000 pixels
  Position = (275.2, 343.2) = 22 35 47.95 -25 58 36.0
  Extent = 5.1 (4.6-5.5)", rotation angle = 0
  Source counts = 391.7 +/- 27.9
  Background counts = 387.9
  Rate = 0.009 +/- 0.0007
[Tue Mar 13 11:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:31:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:31:32 2012] Source does appear to be extended
[Tue Mar 13 11:31:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:32:23 2012] XMMSAS src. selection expression = ellipse(23894.889080, 29806.246000, 304.071609, 304.071609, 0.000000, X, Y)
[Tue Mar 13 11:32:23 2012] Not overwriting source region fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 13 11:32:23 2012] Extracting stamp from image fullrun_mos2_xmm0111790101_pi300-10000_cl_sm2.00.img.gz, (258, 326) - (293, 361)
[Tue Mar 13 11:32:23 2012] XMMSAS bgd. selection expression = annulus(23894.889080, 29806.246000, 506.786015, 1013.572029, X, Y)
[Tue Mar 13 11:32:23 2012] Writing fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6.gif
[Tue Mar 13 11:32:24 2012] ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Mar 13 11:32:25 2012] Mean detx,y = (-1374.73, -5178.18) 
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Mar 13 11:32:25 2012] Setting source spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 11:32:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6.rmf exists, delete to re-create
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Tue Mar 13 11:33:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:33:50 2012] Error reading totcts from fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 11:33:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:52 2012] Using photon index=1.80, rate=0.00916, arf fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src6.arf
[Tue Mar 13 11:33:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:33:52 2012] Updating source flux to 1.4e-13