[Tue Mar 13 11:28:39 2012] Detection parameters:
  Position = (284.0, 291.7) = 22 35 45.13 -26 2 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 714.6 +/- 47.4
  Background counts = 31.6
  Rate = 0.02 +/- 0.001

[Tue Mar 13 11:28:44 2012] Off-axis axis estimate = 1.16'
[Tue Mar 13 11:29:40 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:29:40 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Tue Mar 13 11:29:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Tue Mar 13 11:29:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.01"
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 11:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:29:44 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 13 11:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 13 11:29:44 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 13 11:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 13 11:29:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:30:28 2012] Source 4 is offset by 3.622092 and 6.160534 pixels which is larger than
2 X fitted extent = 2.650115 x 2.650115, not incorporating fit results
[Tue Mar 13 11:30:28 2012] Source 4 is offset by 2.268943 and -4.581811 pixels which is larger than
2 X fitted extent = 2.659439 x 2.659439, not incorporating fit results
[Tue Mar 13 11:30:28 2012] Spatial fit model total counts = 3052.920000, observed total counts = 3038.000000
[Tue Mar 13 11:30:28 2012] Offset between fit and detection position for source 4 = 1.645539 pixels
[Tue Mar 13 11:30:28 2012] Warning, changing simple spatial fit ID from 2 to 23
[Tue Mar 13 11:30:28 2012] 2922.840000 total counts/ 1700.850000 bgd. counts: snr = 29.630204
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.645539 pixels
  Position = (282.6, 292.7) = 22 35 45.56 -26 2 15.5
  Extent = 11.2 (10.5-12.4)", rotation angle = 0
  Source counts = 1222.0 +/- 54.1
  Background counts = 1700.8
  Rate = 0.03 +/- 0.001
[Tue Mar 13 11:30:28 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:30:28 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:30:28 2012] Source does appear to be extended
[Tue Mar 13 11:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:30:28 2012] Source is confused with source 42
[Tue Mar 13 11:30:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:30:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 11:30:58 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Tue Mar 13 11:30:58 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Tue Mar 13 11:30:58 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.21"
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 11:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Mar 13 11:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Mar 13 11:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Mar 13 11:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:31:32 2012] Warning, spatial fit 2 centroid is now closest to src. 10
[Tue Mar 13 11:31:32 2012] Spatial fit model total counts = 3041.320000, observed total counts = 3038.000000
[Tue Mar 13 11:31:32 2012] Offset between fit and detection position for source 4 = 0.073379 pixels
[Tue Mar 13 11:31:32 2012] Warning, changing simple spatial fit ID from 2 to 23
[Tue Mar 13 11:31:32 2012] 2820.570000 total counts/ 1475.380000 bgd. counts: snr = 35.021253
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.073379 pixels
  Position = (282.6, 292.7) = 22 35 45.58 -26 2 15.5
  Extent = 11.9 (11.0-12.9)", rotation angle = 0
  Source counts = 1345.2 +/- 53.1
  Background counts = 1475.4
  Rate = 0.03 +/- 0.001
[Tue Mar 13 11:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:31:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:31:32 2012] Source does appear to be extended
[Tue Mar 13 11:31:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:32:23 2012] Counts = 1345.190000, rescaling region sizes by 2.000000
[Tue Mar 13 11:32:23 2012] XMMSAS src. selection expression = ellipse(24534.678000, 25415.442000, 1431.480041, 1431.480041, 0.000000, X, Y)
[Tue Mar 13 11:32:23 2012] Not overwriting source region fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src.reg
[Tue Mar 13 11:32:23 2012] Extracting stamp from image fullrun_mos2_xmm0111790101_pi300-10000_cl_sm2.00.img.gz, (200, 210) - (365, 375)
[Tue Mar 13 11:32:23 2012] XMMSAS bgd. selection expression = annulus(24534.678000, 25415.442000, 4771.600137, 9543.200275, X, Y) && !ellipse(24411.908680, 24491.768200, 1595.774446, 1595.774446, 0.000000, X, Y) && !ellipse(23894.889080, 29806.246000, 405.428812, 405.428812, 0.000000, X, Y) && !ellipse(23884.809160, 26321.403880, 339.248810, 339.248810, 0.000000, X, Y) && !ellipse(22014.803000, 29869.011200, 366.595211, 366.595211, 0.000000, X, Y) && !ellipse(23831.508000, 24668.978000, 1221.464035, 1221.464035, 0.000000, X, Y) && !ellipse(29777.920400, 21645.682200, 445.616013, 445.616013, 0.000000, X, Y) && !ellipse(16583.259900, 21442.400200, 456.427213, 456.427213, 0.000000, X, Y) && !ellipse(24238.876400, 23464.158000, 1118.112032, 1118.112032, 0.000000, X, Y) && !ellipse(23498.506134, 24324.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19064.109400, 18416.171200, 394.068011, 394.068011, 0.000000, X, Y) && !ellipse(23349.035950, 15438.163757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.334400, 26589.811400, 301.748009, 301.748009, 0.000000, X, Y) && !ellipse(23069.971400, 28387.595800, 336.456810, 336.456810, 0.000000, X, Y) && !ellipse(25708.395000, 27446.966000, 336.372010, 336.372010, 0.000000, X, Y) && !ellipse(14823.586900, 30879.091400, 385.151211, 385.151211, 0.000000, X, Y) && !ellipse(17333.926400, 31635.896000, 663.071219, 433.149612, -0.000000, X, Y) && !ellipse(27766.392200, 34019.202600, 533.216015, 533.216015, 0.000000, X, Y) && !ellipse(31292.727400, 30759.707600, 1514.696044, 772.836822, 13.606300, X, Y) && !ellipse(24872.451935, 25931.721008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22813.342000, 22807.478000, 1268.048036, 1268.048036, 0.000000, X, Y) && !ellipse(15885.634430, 26829.564301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24404.372925, 22735.092285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15944.569443, 33213.688446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.074200, 26592.382000, 1199.744035, 279.926408, 258.166000, X, Y)
[Tue Mar 13 11:32:23 2012] Writing fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4.gif
[Tue Mar 13 11:32:24 2012] ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Mar 13 11:32:24 2012] Mean detx,y = (-86.25, -81.14) 
[Tue Mar 13 11:32:24 2012] ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src.img and ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Mar 13 11:32:24 2012] ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Mar 13 11:32:24 2012] Setting source spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 13 11:32:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Mar 13 11:32:24 2012] ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4.rmf exists, delete to re-create
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Tue Mar 13 11:33:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:33:50 2012] Error reading totcts from fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 13 11:33:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:52 2012] Using photon index=1.80, rate=0.0315, arf fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src4.arf
[Tue Mar 13 11:33:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:33:52 2012] Updating source flux to 2.9e-13
[Tue Mar 13 11:34:00 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Mar 13 11:34:00 2012] Flag c found in src. 4 procflags, skipping spectral fitting