[Tue Mar 13 11:28:38 2012] Detection parameters:
  Position = (219.6, 212.0) = 22 36 5.93 -26 8 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.1 +/- 22.9
  Background counts = 21.4
  Rate = 0.008 +/- 0.0005

[Tue Mar 13 11:28:44 2012] Off-axis axis estimate = 8.48'
[Tue Mar 13 11:29:40 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:29:40 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Tue Mar 13 11:29:40 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Tue Mar 13 11:29:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.67"
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src11.csv
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src11.csv
[Tue Mar 13 11:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:29:45 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Mar 13 11:29:45 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Mar 13 11:29:45 2012] Fit fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Mar 13 11:30:28 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.245903 pixels away
[Tue Mar 13 11:30:28 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:30:28 2012] Assessing source extent using major
[Tue Mar 13 11:30:28 2012] Source does appear to be extended
[Tue Mar 13 11:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:30:58 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:30:58 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Tue Mar 13 11:30:58 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Tue Mar 13 11:30:58 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.67"
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src11.csv
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src11.csv
[Tue Mar 13 11:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Mar 13 11:31:00 2012] Fit fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Mar 13 11:31:32 2012] Spatial fit model total counts = 443.116000, observed total counts = 442.000000
[Tue Mar 13 11:31:32 2012] Offset between fit and detection position for source 2 = 0.297662 pixels
[Tue Mar 13 11:31:32 2012] 442.591000 total counts/ 208.108000 bgd. counts: snr = 16.254251
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.297662 pixels
  Position = (219.7, 212.2) = 22 36 5.90 -26 8 5.3
  Extent = 4.9 (4.5-5.5)", rotation angle = 0
  Source counts = 234.5 +/- 21.0
  Background counts = 208.1
  Rate = 0.005 +/- 0.0005
[Tue Mar 13 11:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:31:32 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:31:32 2012] Source does appear to be extended
[Tue Mar 13 11:31:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:32:23 2012] XMMSAS src. selection expression = ellipse(19064.109400, 18416.171200, 295.551009, 295.551009, 0.000000, X, Y)
[Tue Mar 13 11:32:23 2012] Not overwriting source region fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 13 11:32:23 2012] Extracting stamp from image fullrun_mos2_xmm0111790101_pi300-10000_cl_sm2.00.img.gz, (203, 195) - (237, 229)
[Tue Mar 13 11:32:23 2012] XMMSAS bgd. selection expression = annulus(19064.109400, 18416.171200, 492.585014, 985.170028, X, Y)
[Tue Mar 13 11:32:23 2012] Writing fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2.gif
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Mar 13 11:32:25 2012] Mean detx,y = (-4491.71, 6799.35) 
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Mar 13 11:32:25 2012] Setting source spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:32:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Mar 13 11:33:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:33:50 2012] Error reading totcts from fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:33:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:53 2012] Using photon index=1.80, rate=0.00548, arf fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:33:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:33:53 2012] Updating source flux to 1.2e-13