[Tue Mar 13 11:28:39 2012] Detection parameters:
  Position = (270.7, 280.2) = 22 35 49.43 -26 3 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 392.8 +/- 35.8
  Background counts = 36.9
  Rate = 0.01 +/- 0.0009

[Tue Mar 13 11:28:44 2012] Off-axis axis estimate = 2.41'
[Tue Mar 13 11:29:40 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:29:40 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Tue Mar 13 11:29:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.983
[Tue Mar 13 11:29:40 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.63"
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src10.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src10.csv
[Tue Mar 13 11:29:41 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Mar 13 11:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src10.csv
[Tue Mar 13 11:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:29:45 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar 13 11:29:45 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar 13 11:29:45 2012] Fit fullrun_mos2_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Mar 13 11:30:28 2012] Source 11 is offset by 6.098369 and 0.597576 pixels which is larger than
2 X fitted extent = 0.805393 x 0.805393, not incorporating fit results
[Tue Mar 13 11:30:28 2012] Warning, spatial fit 10 centroid is now closest to src. 10
[Tue Mar 13 11:30:28 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:30:28 2012] Assessing source extent using major
[Tue Mar 13 11:30:28 2012] Source does appear to be extended
[Tue Mar 13 11:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:30:28 2012] Source is confused with source 10
[Tue Mar 13 11:30:58 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:30:58 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Tue Mar 13 11:30:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.983
[Tue Mar 13 11:30:58 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.63"
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src10.csv
[Tue Mar 13 11:30:59 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Mar 13 11:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src10.csv
[Tue Mar 13 11:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Mar 13 11:31:00 2012] fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Mar 13 11:31:00 2012] Fit fullrun_mos2_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Mar 13 11:31:32 2012] Warning, spatial fit 10 centroid is now closest to src. 10
[Tue Mar 13 11:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:31:32 2012] Assessing source extent using major
[Tue Mar 13 11:31:32 2012] Source does appear to be extended
[Tue Mar 13 11:31:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:32:23 2012] XMMSAS src. selection expression = ellipse(23498.506134, 24324.937103, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 11:32:23 2012] Not overwriting source region fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src.reg
[Tue Mar 13 11:32:23 2012] Extracting stamp from image fullrun_mos2_xmm0111790101_pi300-10000_cl_sm2.00.img.gz, (233, 243) - (308, 318)
[Tue Mar 13 11:32:23 2012] XMMSAS bgd. selection expression = annulus(23498.506134, 24324.937103, 1087.500000, 2175.000000, X, Y) && !ellipse(24411.908680, 24491.768200, 1595.774446, 1595.774446, 0.000000, X, Y) && !ellipse(24534.678000, 25415.442000, 954.320027, 954.320027, 0.000000, X, Y) && !ellipse(23884.809160, 26321.403880, 339.248810, 339.248810, 0.000000, X, Y) && !ellipse(23831.508000, 24668.978000, 1221.464035, 1221.464035, 0.000000, X, Y) && !ellipse(24238.876400, 23464.158000, 1118.112032, 1118.112032, 0.000000, X, Y) && !ellipse(24872.451935, 25931.721008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22813.342000, 22807.478000, 1268.048036, 1268.048036, 0.000000, X, Y) && !ellipse(24404.372925, 22735.092285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.074200, 26592.382000, 1199.744035, 279.926408, 258.166000, X, Y)
[Tue Mar 13 11:32:23 2012] Writing fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11.gif
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0111790101/products/events/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Mar 13 11:32:25 2012] Mean detx,y = (-711.32, 223.84) 
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0111790101/products/images/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0111790101/products/spectra/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Mar 13 11:32:25 2012] Setting source spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 13 11:32:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Mar 13 11:32:25 2012] ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0111790101/products/lightcurves/fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Mar 13 11:32:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 11:32:36 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:32:36 2012] fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue Mar 13 11:33:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:33:50 2012] Error reading totcts from fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 13 11:33:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:52 2012] Using photon index=1.80, rate=0.00963, arf fullrun_mos2_xmm0111790101_pi300-10000_pass1_cl_src11.arf
[Tue Mar 13 11:33:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:33:53 2012] Updating source flux to 9.4e-14
[Tue Mar 13 11:34:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting