[Tue Mar 13 11:28:38 2012] Detection parameters:
  Position = (274.6, 264.6) = 22 35 48.17 -26 4 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.0 +/- 19.3
  Background counts = 31.1
  Rate = 0.003 +/- 0.0005

[Tue Mar 13 11:28:38 2012] Off-axis axis estimate = 3.00'
[Tue Mar 13 11:29:31 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:29:31 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Tue Mar 13 11:29:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.695
[Tue Mar 13 11:29:31 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.93"
[Tue Mar 13 11:29:34 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src25.ximg exists
[Tue Mar 13 11:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src25.csv
[Tue Mar 13 11:29:34 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Mar 13 11:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src25.csv
[Tue Mar 13 11:29:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:29:36 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Mar 13 11:29:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue Mar 13 11:29:36 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Mar 13 11:29:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue Mar 13 11:29:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:30:12 2012] Source 45 is offset by -3.798024 and -6.648527 pixels which is larger than
2 X fitted extent = 5.783862 x 5.783862, not incorporating fit results
[Tue Mar 13 11:30:12 2012] Warning, spatial fit 25 centroid is now closest to src. 24
[Tue Mar 13 11:30:12 2012] Source 45 is offset by 1.858183 and -7.550320 pixels which is larger than
2 X fitted extent = 3.871770 x 3.871770, not incorporating fit results
[Tue Mar 13 11:30:12 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:30:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:30:12 2012] Assessing source extent using major
[Tue Mar 13 11:30:12 2012] Source does appear to be extended
[Tue Mar 13 11:30:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:30:12 2012] Source is confused with source 24
[Tue Mar 13 11:30:50 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:30:50 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Tue Mar 13 11:30:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.695
[Tue Mar 13 11:30:50 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.93"
[Tue Mar 13 11:30:55 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src25.ximg exists
[Tue Mar 13 11:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src25.csv
[Tue Mar 13 11:30:55 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Mar 13 11:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src25.csv
[Tue Mar 13 11:30:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:30:57 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Mar 13 11:30:57 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Mar 13 11:30:57 2012] Fit fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Mar 13 11:31:20 2012] Source 45 is offset by -2.986185 and -8.721308 pixels which is larger than
2 X fitted extent = 6.838345 x 6.838345, not incorporating fit results
[Tue Mar 13 11:31:20 2012] Source 45 is offset by 1.872022 and -7.543584 pixels which is larger than
2 X fitted extent = 3.824207 x 3.824207, not incorporating fit results
[Tue Mar 13 11:31:20 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:31:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:31:20 2012] Assessing source extent using major
[Tue Mar 13 11:31:20 2012] Source does appear to be extended
[Tue Mar 13 11:31:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:32:12 2012] XMMSAS src. selection expression = ellipse(23838.341919, 22969.194183, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 11:32:12 2012] Not overwriting source region fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src.reg
[Tue Mar 13 11:32:12 2012] Extracting stamp from image fullrun_mos1_xmm0111790101_pi300-10000_cl_sm2.00.img.gz, (237, 227) - (312, 302)
[Tue Mar 13 11:32:12 2012] XMMSAS bgd. selection expression = annulus(23838.341919, 22969.194183, 1087.500000, 2175.000000, X, Y) && !ellipse(24406.385420, 24488.792000, 1610.932846, 1610.932846, 0.000000, X, Y) && !ellipse(24682.580000, 22291.384000, 568.704816, 343.336010, 0.000000, X, Y) && !ellipse(24382.734436, 22863.898376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23113.210938, 23126.836548, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:32:12 2012] Writing fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45.gif
[Tue Mar 13 11:32:13 2012] ../../xmm0111790101/products/events/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0111790101/products/events/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Tue Mar 13 11:32:14 2012] Mean detx,y = (1637.42, 235.81) 
[Tue Mar 13 11:32:14 2012] ../../xmm0111790101/products/images/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src.img and ../../xmm0111790101/products/images/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Tue Mar 13 11:32:14 2012] ../../xmm0111790101/products/spectra/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0111790101/products/spectra/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Tue Mar 13 11:32:14 2012] Setting source spectrum file to fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Mar 13 11:32:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue Mar 13 11:32:14 2012] ../../xmm0111790101/products/lightcurves/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0111790101/products/lightcurves/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Tue Mar 13 11:32:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 11:32:23 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:32:23 2012] fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Tue Mar 13 11:33:45 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:33:45 2012] Error reading totcts from fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Mar 13 11:33:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:49 2012] Using photon index=1.80, rate=0.00266, arf fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src45.arf
[Tue Mar 13 11:33:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:33:49 2012] Updating source flux to 2.7e-14
[Tue Mar 13 11:33:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting