[Tue Mar 13 11:28:33 2012] Detection parameters:
  Position = (281.1, 282.0) = 22 35 46.04 -26 3 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116583.4 +/- 411.9
  Background counts = 40.6
  Rate = 3 +/- 0.01

[Tue Mar 13 11:28:38 2012] Off-axis axis estimate = 1.73'
[Tue Mar 13 11:29:31 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:29:31 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Mar 13 11:29:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Mar 13 11:29:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Mar 13 11:29:32 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 11:29:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:29:32 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 11:29:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:29:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:29:35 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 11:29:35 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:29:35 2012] Fit fullrun_mos1_xmm0111790101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:30:12 2012] Spatial fit model total counts = 106128.000000, observed total counts = 106147.000000
[Tue Mar 13 11:30:12 2012] Offset between fit and detection position for source 2 = 0.054319 pixels
[Tue Mar 13 11:30:12 2012] 106228.600000 total counts/ 22743.000000 bgd. counts: snr = 553.589312
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.054319 pixels
  Position = (281.1, 282.0) = 22 35 46.06 -26 3 1.8
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 83485.6 +/- 325.9
  Background counts = 22743.0
  Rate = 2 +/- 0.008
[Tue Mar 13 11:30:12 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:30:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:30:12 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:30:12 2012] Source does appear to be extended
[Tue Mar 13 11:30:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:30:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:30:50 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Tue Mar 13 11:30:50 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Tue Mar 13 11:30:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.71"
[Tue Mar 13 11:30:51 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 11:30:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:30:51 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 11:30:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:30:56 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 11:30:56 2012] fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:30:56 2012] Fit fullrun_mos1_xmm0111790101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:31:20 2012] Spatial fit model total counts = 106147.000000, observed total counts = 106147.000000
[Tue Mar 13 11:31:20 2012] Offset between fit and detection position for source 2 = 0.001421 pixels
[Tue Mar 13 11:31:20 2012] 106246.700000 total counts/ 22741.000000 bgd. counts: snr = 553.746943
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001421 pixels
  Position = (281.1, 282.0) = 22 35 46.06 -26 3 1.8
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 83505.7 +/- 326.0
  Background counts = 22741.0
  Rate = 2 +/- 0.008
[Tue Mar 13 11:31:20 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:31:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:31:20 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:31:20 2012] Source does appear to be extended
[Tue Mar 13 11:31:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:32:12 2012] Counts = 83505.700000, rescaling region sizes by 3.000000
[Tue Mar 13 11:32:12 2012] XMMSAS src. selection expression = ellipse(24406.385420, 24488.792000, 1208.199635, 1208.199635, 0.000000, X, Y)
[Tue Mar 13 11:32:12 2012] Not overwriting source region fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 13 11:32:12 2012] Extracting stamp from image fullrun_mos1_xmm0111790101_pi300-10000_cl_sm2.00.img.gz, (212, 213) - (351, 351)
[Tue Mar 13 11:32:12 2012] XMMSAS bgd. selection expression = annulus(24406.385420, 24488.792000, 6040.998174, 12081.996348, X, Y) && !ellipse(19014.309840, 18452.040800, 483.842414, 483.842414, 0.000000, X, Y) && !ellipse(23881.765380, 29816.504800, 428.016012, 428.016012, 0.000000, X, Y) && !ellipse(23878.521300, 26324.850200, 300.972009, 300.972009, 0.000000, X, Y) && !ellipse(22009.991000, 29853.588600, 387.269611, 387.269611, 0.000000, X, Y) && !ellipse(29793.787492, 21668.470600, 421.011212, 421.011212, 0.000000, X, Y) && !ellipse(16554.977000, 21458.606000, 456.143213, 456.143213, 0.000000, X, Y) && !ellipse(23360.317169, 15417.077515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.831451, 27447.211731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29472.693200, 26581.518000, 407.014412, 407.014412, 0.000000, X, Y) && !ellipse(14236.883804, 15980.361893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14837.943939, 30903.427979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14680.552475, 19291.829926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23053.204200, 28407.434800, 314.247209, 314.247209, 0.000000, X, Y) && !ellipse(24682.580000, 22291.384000, 568.704816, 343.336010, 0.000000, X, Y) && !ellipse(24382.734436, 22863.898376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31395.458600, 30845.513400, 1089.080031, 1089.080031, 0.000000, X, Y) && !ellipse(17268.247574, 31648.474335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15891.017502, 26826.359680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16003.504456, 33300.672516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23838.341919, 22969.194183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11951.025711, 29015.856140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23113.210938, 23126.836548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25405.013641, 12806.508011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32889.609800, 33243.243600, 483.804814, 483.804814, 0.000000, X, Y) && !ellipse(29112.512482, 37337.397644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36975.556976, 28401.004456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12311.625153, 13993.493286, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:32:12 2012] Writing fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2.gif
[Tue Mar 13 11:32:13 2012] ../../xmm0111790101/products/events/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111790101/products/events/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Mar 13 11:32:13 2012] Mean detx,y = (218.31, -74.09) 
[Tue Mar 13 11:32:13 2012] ../../xmm0111790101/products/images/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111790101/products/images/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Mar 13 11:32:13 2012] ../../xmm0111790101/products/spectra/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111790101/products/spectra/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Mar 13 11:32:13 2012] Setting source spectrum file to fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:32:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 11:32:13 2012] ../../xmm0111790101/products/lightcurves/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111790101/products/lightcurves/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Mar 13 11:32:23 2012] fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Mar 13 11:32:23 2012] fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Mar 13 11:33:44 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:33:44 2012] Error reading totcts from fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:33:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:46 2012] Using photon index=1.80, rate=1.95, arf fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:33:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:33:46 2012] Updating source flux to 1.8e-11
[Tue Mar 13 11:33:59 2012] Reading fit data from xmm0111790101/analysis//spectral/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 13 11:33:59 2012] Spectral fit parameter nH value = 6.94907e+21
[Tue Mar 13 11:33:59 2012] Spectral fit parameter PhoIndex value = 1.7828
[Tue Mar 13 11:33:59 2012] Failed to get F(0.3-8.0) from xmm0111790101/analysis//spectral/fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 11:33:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:33:59 2012] Using Nh = 6.9e+21, photon index=1.78, rate=1.95, arf fullrun_mos1_xmm0111790101_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:33:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:34:00 2012] Updating source flux to 2.7e-11