[Sat Nov 26 01:55:03 2011] Detection parameters:
  Position = (315.7, 288.1) = 13 35 51.53 -34 20 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 425.8 +/- 33.8
  Background counts = 113.5
  Rate = 0.02 +/- 0.001

[Sat Nov 26 01:55:03 2011] Off-axis axis estimate = 1.46'
[Sat Nov 26 01:55:40 2011] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:55:40 2011] Initial guess for spatial extent in simple fitting = 7.16"
[Sat Nov 26 01:55:40 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Sat Nov 26 01:55:40 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.16"
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Nov 26 01:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Nov 26 01:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 01:55:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Nov 26 01:55:41 2011] Fit fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Nov 26 01:55:49 2011] Warning, spatial fit 3 centroid is now closest to src. 4
[Sat Nov 26 01:55:49 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:55:49 2011] Assessing source extent using major
[Sat Nov 26 01:55:49 2011] Source does appear to be extended
[Sat Nov 26 01:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:55:49 2011] Source is confused with source 4
[Sat Nov 26 01:56:20 2011] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:56:20 2011] Initial guess for spatial extent in simple fitting = 7.16"
[Sat Nov 26 01:56:20 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Sat Nov 26 01:56:20 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.16"
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Nov 26 01:56:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Nov 26 01:56:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 01:56:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:56:22 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Nov 26 01:56:22 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Nov 26 01:56:22 2011] Fit fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Nov 26 01:56:32 2011] Source 3 is offset by 5.387291 and -7.522033 pixels which is larger than
2 X fitted extent = 6.583862 x 6.583862, not incorporating fit results
[Sat Nov 26 01:56:32 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.885437 pixels away
[Sat Nov 26 01:56:32 2011] Source 3 is offset by 7.009107 and 3.793231 pixels which is larger than
2 X fitted extent = 1.158575 x 1.158575, not incorporating fit results
[Sat Nov 26 01:56:32 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:32 2011] Assessing source extent using major
[Sat Nov 26 01:56:32 2011] Source does appear to be extended
[Sat Nov 26 01:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:57 2011] XMMSAS src. selection expression = ellipse(27420.924286, 25012.879089, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 01:56:57 2011] Not overwriting source region fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src.reg
[Sat Nov 26 01:56:57 2011] Extracting stamp from image fullrun_pn_xmm0111570101_pi300-10000_cl_sm2.00.img.gz, (278, 251) - (353, 326)
[Sat Nov 26 01:56:57 2011] XMMSAS bgd. selection expression = annulus(27420.924286, 25012.879089, 1087.500000, 2175.000000, X, Y) && !ellipse(26856.139000, 27688.681980, 1600.157746, 1600.157746, 0.000000, X, Y) && !ellipse(29716.962160, 27133.795600, 415.885509, 415.885509, 0.000000, X, Y) && !ellipse(27477.510600, 24659.920600, 1171.960034, 379.607211, 76.392100, X, Y) && !ellipse(27653.893400, 23868.631000, 806.368023, 806.368023, 0.000000, X, Y) && !ellipse(25656.774139, 27198.148743, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 01:56:57 2011] Writing fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3.gif
[Sat Nov 26 01:57:00 2011] ../../xmm0111570101/products/events/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0111570101/products/events/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Nov 26 01:57:03 2011] Mean detx,y = (259.46, 2619.91) 
[Sat Nov 26 01:57:03 2011] ../../xmm0111570101/products/images/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0111570101/products/images/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Nov 26 01:57:03 2011] ../../xmm0111570101/products/spectra/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0111570101/products/spectra/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Nov 26 01:57:03 2011] Setting source spectrum file to fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Nov 26 01:57:03 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Nov 26 01:57:03 2011] ../../xmm0111570101/products/lightcurves/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0111570101/products/lightcurves/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Nov 26 01:57:11 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Nov 26 01:57:11 2011] rmf not generated due to insufficient counts
[Sat Nov 26 01:57:11 2011] fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sat Nov 26 01:58:32 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:58:32 2011] Error reading totcts from fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Nov 26 01:58:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:33 2011] Using photon index=1.80, rate=0.0157, arf fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src3.arf
[Sat Nov 26 01:58:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:33 2011] Updating source flux to 4.2e-14
[Sat Nov 26 01:58:42 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting