[Sat Nov 26 01:55:03 2011] Detection parameters:
  Position = (342.2, 312.7) = 13 35 42.24 -34 18 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.1 +/- 23.9
  Background counts = 105.4
  Rate = 0.009 +/- 0.001

[Sat Nov 26 01:55:03 2011] Off-axis axis estimate = 3.34'
[Sat Nov 26 01:55:40 2011] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:55:40 2011] Initial guess for spatial extent in simple fitting = 8.10"
[Sat Nov 26 01:55:40 2011] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.031
[Sat Nov 26 01:55:40 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 8.10"
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Nov 26 01:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src2.csv
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Nov 26 01:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src2.csv
[Sat Nov 26 01:55:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Nov 26 01:55:41 2011] Fit fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Nov 26 01:55:49 2011] Spatial fit model total counts = 1391.090000, observed total counts = 1525.000000
[Sat Nov 26 01:55:49 2011] Offset between fit and detection position for source 2 = 0.226739 pixels
[Sat Nov 26 01:55:49 2011] 1236.696000 total counts/ 983.453000 bgd. counts: snr = 8.075337
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.226739 pixels
  Position = (342.1, 312.5) = 13 35 42.27 -34 18 13.1
  Extent = 5.2 (4.8-5.6)", rotation angle = 0
  Source counts = 253.2 +/- 35.2
  Background counts = 983.5
  Rate = 0.006 +/- 0.0009
[Sat Nov 26 01:55:49 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:55:49 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 01:55:49 2011] Source does appear to be extended
[Sat Nov 26 01:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:56:20 2011] Initial guess for spatial extent in simple fitting = 5.20"
[Sat Nov 26 01:56:20 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.045
[Sat Nov 26 01:56:20 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 5.20"
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Nov 26 01:56:21 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src2.csv
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Nov 26 01:56:21 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src2.csv
[Sat Nov 26 01:56:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Nov 26 01:56:22 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Nov 26 01:56:22 2011] Fit fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Nov 26 01:56:32 2011] Spatial fit model total counts = 1428.940000, observed total counts = 1544.000000
[Sat Nov 26 01:56:32 2011] Offset between fit and detection position for source 2 = 0.013297 pixels
[Sat Nov 26 01:56:32 2011] 1281.664000 total counts/ 1031.610000 bgd. counts: snr = 7.785312
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.013297 pixels
  Position = (342.1, 312.4) = 13 35 42.27 -34 18 13.1
  Extent = 5.2 (4.7-5.6)", rotation angle = 0
  Source counts = 250.1 +/- 35.8
  Background counts = 1031.6
  Rate = 0.006 +/- 0.0009
[Sat Nov 26 01:56:32 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:32 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 01:56:32 2011] Source does appear to be extended
[Sat Nov 26 01:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:57 2011] XMMSAS src. selection expression = ellipse(29716.962160, 27133.795600, 311.914132, 311.914132, 0.000000, X, Y)
[Sat Nov 26 01:56:57 2011] Not overwriting source region fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src.reg
[Sat Nov 26 01:56:57 2011] Extracting stamp from image fullrun_pn_xmm0111570101_pi300-10000_cl_sm2.00.img.gz, (324, 295) - (360, 330)
[Sat Nov 26 01:56:57 2011] XMMSAS bgd. selection expression = annulus(29716.962160, 27133.795600, 519.856886, 1039.713772, X, Y)
[Sat Nov 26 01:56:57 2011] Writing fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2.gif
[Sat Nov 26 01:56:59 2011] ../../xmm0111570101/products/events/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111570101/products/events/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Nov 26 01:57:00 2011] Mean detx,y = (2871.57, 1044.63) 
[Sat Nov 26 01:57:00 2011] ../../xmm0111570101/products/images/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111570101/products/images/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Nov 26 01:57:00 2011] ../../xmm0111570101/products/spectra/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111570101/products/spectra/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Nov 26 01:57:00 2011] Setting source spectrum file to fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Nov 26 01:57:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Nov 26 01:57:00 2011] ../../xmm0111570101/products/lightcurves/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111570101/products/lightcurves/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Nov 26 01:57:11 2011] fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Sat Nov 26 01:57:11 2011] fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sat Nov 26 01:58:32 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:58:32 2011] Error reading totcts from fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Nov 26 01:58:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:33 2011] Using photon index=1.80, rate=0.00608, arf fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src2.arf
[Sat Nov 26 01:58:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:33 2011] Updating source flux to 2.1e-14