[Sat Nov 26 01:55:02 2011] Detection parameters:
  Position = (309.4, 318.9) = 13 35 53.78 -34 17 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 460013.7 +/- 747.3
  Background counts = 107.3
  Rate = 2e+01 +/- 0.03

[Sat Nov 26 01:55:03 2011] Off-axis axis estimate = 1.68'
[Sat Nov 26 01:55:40 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:55:40 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Nov 26 01:55:40 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Sat Nov 26 01:55:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Nov 26 01:55:40 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 01:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 01:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 01:55:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 01:55:41 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 01:55:41 2011] Fit fullrun_pn_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 01:55:49 2011] Spatial fit model total counts = 380885.000000, observed total counts = 402173.000000
[Sat Nov 26 01:55:49 2011] Offset between fit and detection position for source 1 = 0.121215 pixels
[Sat Nov 26 01:55:49 2011] 380603.000000 total counts/ 25600.000000 bgd. counts: snr = 2218.768750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.121215 pixels
  Position = (309.2, 318.8) = 13 35 53.81 -34 17 45.4
  Extent = 6.7 (6.6-6.7)", rotation angle = 0
  Source counts = 355003.0 +/- 616.9
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Sat Nov 26 01:55:49 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:55:49 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 01:55:49 2011] Source does appear to be extended
[Sat Nov 26 01:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:56:20 2011] Initial guess for spatial extent in simple fitting = 6.65"
[Sat Nov 26 01:56:20 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.972
[Sat Nov 26 01:56:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.65"
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 01:56:21 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 01:56:21 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 01:56:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 01:56:21 2011] fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 01:56:21 2011] Fit fullrun_pn_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Nov 26 01:56:32 2011] Spatial fit model total counts = 381083.000000, observed total counts = 402721.000000
[Sat Nov 26 01:56:32 2011] Offset between fit and detection position for source 1 = 0.006712 pixels
[Sat Nov 26 01:56:32 2011] 381032.000000 total counts/ 25600.000000 bgd. counts: snr = 2221.450000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006712 pixels
  Position = (309.2, 318.8) = 13 35 53.81 -34 17 45.4
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 355432.0 +/- 617.3
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Sat Nov 26 01:56:32 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:32 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 01:56:32 2011] Source does appear to be extended
[Sat Nov 26 01:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:57 2011] Counts = 355432.000000, rescaling region sizes by 3.000000
[Sat Nov 26 01:56:57 2011] XMMSAS src. selection expression = ellipse(26856.139000, 27688.681980, 1200.118310, 1200.118310, 0.000000, X, Y)
[Sat Nov 26 01:56:57 2011] Not overwriting source region fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src.reg
[Sat Nov 26 01:56:57 2011] Extracting stamp from image fullrun_pn_xmm0111570101_pi300-10000_cl_sm2.00.img.gz, (240, 250) - (378, 388)
[Sat Nov 26 01:56:57 2011] XMMSAS bgd. selection expression = annulus(26856.139000, 27688.681980, 6000.591549, 12001.183098, X, Y) && !ellipse(29716.962160, 27133.795600, 415.885509, 415.885509, 0.000000, X, Y) && !ellipse(27420.924286, 25012.879089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.510600, 24659.920600, 1171.960034, 379.607211, 76.392100, X, Y) && !ellipse(27653.893400, 23868.631000, 806.368023, 806.368023, 0.000000, X, Y) && !ellipse(25656.774139, 27198.148743, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 01:56:57 2011] Writing fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1.gif
[Sat Nov 26 01:56:57 2011] ../../xmm0111570101/products/events/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0111570101/products/events/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Nov 26 01:56:59 2011] Mean detx,y = (217.88, -62.78) 
[Sat Nov 26 01:56:59 2011] ../../xmm0111570101/products/images/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0111570101/products/images/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Nov 26 01:56:59 2011] ../../xmm0111570101/products/spectra/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0111570101/products/spectra/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Nov 26 01:56:59 2011] Setting source spectrum file to fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 01:56:59 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Nov 26 01:56:59 2011] ../../xmm0111570101/products/lightcurves/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0111570101/products/lightcurves/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Nov 26 01:57:11 2011] fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Sat Nov 26 01:57:11 2011] fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Sat Nov 26 01:58:32 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:58:32 2011] Error reading totcts from fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Nov 26 01:58:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:32 2011] Using photon index=1.80, rate=8.65, arf fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 01:58:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:33 2011] Updating source flux to 2e-11
[Sat Nov 26 01:58:43 2011] Reading fit data from xmm0111570101/analysis//spectral/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Nov 26 01:58:43 2011] Spectral fit parameter nH value = 869413000000.0
[Sat Nov 26 01:58:43 2011] Spectral fit parameter PhoIndex value = 1.7997
[Sat Nov 26 01:58:43 2011] Failed to get F(0.3-8.0) from xmm0111570101/analysis//spectral/fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Nov 26 01:58:43 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:43 2011] Using Nh = 8.7e+11, photon index=1.80, rate=8.65, arf fullrun_pn_xmm0111570101_pi300-10000_pass1_cl_src1.arf
[Sat Nov 26 01:58:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:43 2011] Updating source flux to 2e-11