[Sat Nov 26 01:55:07 2011] Detection parameters:
  Position = (318.2, 323.0) = 13 35 50.68 -34 17 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.2 +/- 35.8
  Background counts = 29.7
  Rate = 0.009 +/- 0.0009

[Sat Nov 26 01:55:10 2011] Off-axis axis estimate = 2.29'
[Sat Nov 26 01:55:43 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:55:43 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Sat Nov 26 01:55:43 2011] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.647
[Sat Nov 26 01:55:43 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.57"
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Nov 26 01:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src5.csv
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Nov 26 01:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src5.csv
[Sat Nov 26 01:55:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Nov 26 01:55:44 2011] Fit fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Nov 26 01:56:05 2011] Source 5 is offset by -8.201346 and -2.348230 pixels which is larger than
2 X fitted extent = 6.908690 x 6.908690, not incorporating fit results
[Sat Nov 26 01:56:05 2011] Source 5 is offset by 7.143689 and 4.411655 pixels which is larger than
2 X fitted extent = 2.328345 x 2.328345, not incorporating fit results
[Sat Nov 26 01:56:06 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:06 2011] Assessing source extent using major
[Sat Nov 26 01:56:06 2011] Source does appear to be extended
[Sat Nov 26 01:56:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:06 2011] Source is confused with source 4
[Sat Nov 26 01:56:24 2011] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:56:24 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Sat Nov 26 01:56:24 2011] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.647
[Sat Nov 26 01:56:24 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.57"
[Sat Nov 26 01:56:26 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Nov 26 01:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src5.csv
[Sat Nov 26 01:56:26 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Nov 26 01:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src5.csv
[Sat Nov 26 01:56:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:56:27 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Nov 26 01:56:27 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Nov 26 01:56:27 2011] Fit fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Nov 26 01:56:44 2011] Source 5 is offset by -7.330357 and -2.994460 pixels which is larger than
2 X fitted extent = 6.908690 x 6.908690, not incorporating fit results
[Sat Nov 26 01:56:44 2011] Source 5 is offset by 7.143689 and 4.401448 pixels which is larger than
2 X fitted extent = 2.383600 x 2.383600, not incorporating fit results
[Sat Nov 26 01:56:44 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:44 2011] Assessing source extent using major
[Sat Nov 26 01:56:44 2011] Source does appear to be extended
[Sat Nov 26 01:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:57:18 2011] XMMSAS src. selection expression = ellipse(27633.262909, 28054.785980, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 01:57:18 2011] Not overwriting source region fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src.reg
[Sat Nov 26 01:57:18 2011] Extracting stamp from image fullrun_mos2_xmm0111570101_pi300-10000_cl_sm2.00.img.gz, (281, 286) - (356, 361)
[Sat Nov 26 01:57:18 2011] XMMSAS bgd. selection expression = annulus(27633.262909, 28054.785980, 1087.500000, 2175.000000, X, Y) && !ellipse(26855.858600, 27694.124800, 1810.216852, 1810.216852, 0.000000, X, Y) && !ellipse(25674.730103, 27269.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.348999, 27699.274902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27413.561890, 29109.453888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24979.800079, 27614.507782, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 01:57:18 2011] Writing fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5.gif
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/events/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0111570101/products/events/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Nov 26 01:57:19 2011] Mean detx,y = (-541.65, 60.82) 
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/images/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0111570101/products/images/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/spectra/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0111570101/products/spectra/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Nov 26 01:57:19 2011] Setting source spectrum file to fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Nov 26 01:57:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/lightcurves/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0111570101/products/lightcurves/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Nov 26 01:57:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Nov 26 01:57:23 2011] rmf not generated due to insufficient counts
[Sat Nov 26 01:57:23 2011] fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sat Nov 26 01:58:36 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:58:36 2011] Error reading totcts from fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Nov 26 01:58:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:37 2011] Using photon index=1.80, rate=0.00889, arf fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src5.arf
[Sat Nov 26 01:58:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:37 2011] Updating source flux to 8.6e-14
[Sat Nov 26 01:58:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting