[Sat Nov 26 01:55:07 2011] Detection parameters:
  Position = (295.7, 314.0) = 13 35 58.58 -34 18 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 656.4 +/- 39.0
  Background counts = 32.2
  Rate = 0.02 +/- 0.001

[Sat Nov 26 01:55:10 2011] Off-axis axis estimate = 1.15'
[Sat Nov 26 01:55:43 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:55:43 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Sat Nov 26 01:55:43 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Sat Nov 26 01:55:43 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.00"
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Nov 26 01:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Nov 26 01:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src3.csv
[Sat Nov 26 01:55:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Nov 26 01:55:44 2011] Fit fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Nov 26 01:56:05 2011] Source 3 is offset by -5.768872 and -3.310667 pixels which is larger than
2 X fitted extent = 5.681563 x 5.681563, not incorporating fit results
[Sat Nov 26 01:56:05 2011] Source 3 is offset by 2.521036 and 1.831608 pixels which is larger than
2 X fitted extent = 2.037972 x 2.037972, not incorporating fit results
[Sat Nov 26 01:56:06 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:06 2011] Assessing source extent using major
[Sat Nov 26 01:56:06 2011] Source does appear to be extended
[Sat Nov 26 01:56:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:24 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:56:24 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Sat Nov 26 01:56:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Sat Nov 26 01:56:24 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.00"
[Sat Nov 26 01:56:26 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Nov 26 01:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 01:56:26 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Nov 26 01:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src3.csv
[Sat Nov 26 01:56:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:56:27 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Nov 26 01:56:27 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Nov 26 01:56:27 2011] Fit fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Nov 26 01:56:44 2011] Warning, spatial fit 3 centroid is now closest to src. 13
[Sat Nov 26 01:56:44 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.166701 pixels away
[Sat Nov 26 01:56:44 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:44 2011] Assessing source extent using major
[Sat Nov 26 01:56:44 2011] Source does appear to be extended
[Sat Nov 26 01:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:57:18 2011] XMMSAS src. selection expression = ellipse(25674.730103, 27269.361938, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 01:57:18 2011] Not overwriting source region fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src.reg
[Sat Nov 26 01:57:18 2011] Extracting stamp from image fullrun_mos2_xmm0111570101_pi300-10000_cl_sm2.00.img.gz, (258, 276) - (333, 351)
[Sat Nov 26 01:57:18 2011] XMMSAS bgd. selection expression = annulus(25674.730103, 27269.361938, 1087.500000, 2175.000000, X, Y) && !ellipse(26855.858600, 27694.124800, 1810.216852, 1810.216852, 0.000000, X, Y) && !ellipse(27811.348999, 27699.274902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.262909, 28054.785980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27413.561890, 29109.453888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24979.800079, 27614.507782, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 01:57:18 2011] Writing fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3.gif
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/events/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0111570101/products/events/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Nov 26 01:57:19 2011] Mean detx,y = (956.13, -248.04) 
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/images/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0111570101/products/images/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/spectra/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0111570101/products/spectra/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Nov 26 01:57:19 2011] Setting source spectrum file to fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Nov 26 01:57:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/lightcurves/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0111570101/products/lightcurves/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Nov 26 01:57:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Nov 26 01:57:23 2011] rmf not generated due to insufficient counts
[Sat Nov 26 01:57:23 2011] fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sat Nov 26 01:58:36 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:58:36 2011] Error reading totcts from fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Nov 26 01:58:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:37 2011] Using photon index=1.80, rate=0.0162, arf fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src3.arf
[Sat Nov 26 01:58:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:37 2011] Updating source flux to 1.8e-13
[Sat Nov 26 01:58:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting