[Sat Nov 26 01:55:07 2011] Detection parameters:
  Position = (309.5, 318.9) = 13 35 53.73 -34 17 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127226.2 +/- 414.0
  Background counts = 31.6
  Rate = 3 +/- 0.01

[Sat Nov 26 01:55:10 2011] Off-axis axis estimate = 1.68'
[Sat Nov 26 01:55:43 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:55:43 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Sat Nov 26 01:55:43 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Sat Nov 26 01:55:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Nov 26 01:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Nov 26 01:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src1.csv
[Sat Nov 26 01:55:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Nov 26 01:55:44 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Nov 26 01:55:44 2011] Fit fullrun_mos2_xmm0111570101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Nov 26 01:56:05 2011] Spatial fit model total counts = 119929.000000, observed total counts = 120031.000000
[Sat Nov 26 01:56:05 2011] Offset between fit and detection position for source 2 = 0.201311 pixels
[Sat Nov 26 01:56:05 2011] 119334.100000 total counts/ 20075.500000 bgd. counts: snr = 700.543262
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.201311 pixels
  Position = (309.3, 318.7) = 13 35 53.79 -34 17 45.8
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 99258.6 +/- 345.4
  Background counts = 20075.5
  Rate = 2 +/- 0.008
[Sat Nov 26 01:56:06 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:06 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 01:56:06 2011] Source does appear to be extended
[Sat Nov 26 01:56:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:56:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:56:24 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Sat Nov 26 01:56:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Sat Nov 26 01:56:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.00"
[Sat Nov 26 01:56:26 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Nov 26 01:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 01:56:26 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Nov 26 01:56:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src1.csv
[Sat Nov 26 01:56:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 01:56:27 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Nov 26 01:56:27 2011] fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Nov 26 01:56:27 2011] Fit fullrun_mos2_xmm0111570101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Nov 26 01:56:44 2011] Spatial fit model total counts = 124274.000000, observed total counts = 120031.000000
[Sat Nov 26 01:56:44 2011] Offset between fit and detection position for source 2 = 0.167457 pixels
[Sat Nov 26 01:56:44 2011] 124042.900000 total counts/ 23441.900000 bgd. counts: snr = 657.061307
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.167457 pixels
  Position = (309.2, 318.9) = 13 35 53.82 -34 17 45.2
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 100601.0 +/- 352.2
  Background counts = 23441.9
  Rate = 2 +/- 0.009
[Sat Nov 26 01:56:44 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 01:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 01:56:44 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 01:56:44 2011] Source does appear to be extended
[Sat Nov 26 01:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:57:18 2011] Counts = 100601.000000, rescaling region sizes by 3.000000
[Sat Nov 26 01:57:18 2011] XMMSAS src. selection expression = ellipse(26855.858600, 27694.124800, 1357.662639, 1357.662639, 0.000000, X, Y)
[Sat Nov 26 01:57:18 2011] Not overwriting source region fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src.reg
[Sat Nov 26 01:57:18 2011] Extracting stamp from image fullrun_mos2_xmm0111570101_pi300-10000_cl_sm2.00.img.gz, (231, 241) - (387, 397)
[Sat Nov 26 01:57:18 2011] XMMSAS bgd. selection expression = annulus(26855.858600, 27694.124800, 6788.313195, 13576.626391, X, Y) && !ellipse(35548.122955, 22918.573395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25674.730103, 27269.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.348999, 27699.274902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.262909, 28054.785980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23926.050812, 22030.694427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.766120, 23153.813400, 436.320813, 436.320813, 0.000000, X, Y) && !ellipse(37025.532593, 24118.519196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27413.561890, 29109.453888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18646.945877, 17078.255005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24979.800079, 27614.507782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18312.355103, 14145.525574, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 01:57:18 2011] Writing fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2.gif
[Sat Nov 26 01:57:18 2011] ../../xmm0111570101/products/events/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111570101/products/events/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Nov 26 01:57:19 2011] Mean detx,y = (-62.93, -90.48) 
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/images/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111570101/products/images/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/spectra/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111570101/products/spectra/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Nov 26 01:57:19 2011] Setting source spectrum file to fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Nov 26 01:57:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Nov 26 01:57:19 2011] ../../xmm0111570101/products/lightcurves/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111570101/products/lightcurves/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Nov 26 01:57:23 2011] fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Sat Nov 26 01:57:23 2011] fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sat Nov 26 01:58:36 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:58:36 2011] Error reading totcts from fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Nov 26 01:58:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:36 2011] Using photon index=1.80, rate=2.43, arf fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2.arf
[Sat Nov 26 01:58:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:36 2011] Updating source flux to 2.3e-11
[Sat Nov 26 01:58:42 2011] Reading fit data from xmm0111570101/analysis//spectral/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Nov 26 01:58:42 2011] Spectral fit parameter nH value = 3.55939e+12
[Sat Nov 26 01:58:42 2011] Spectral fit parameter PhoIndex value = 1.657
[Sat Nov 26 01:58:42 2011] Failed to get F(0.3-8.0) from xmm0111570101/analysis//spectral/fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Nov 26 01:58:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:58:42 2011] Using Nh = 3.6e+12, photon index=1.66, rate=2.43, arf fullrun_mos2_xmm0111570101_pi300-10000_pass1_cl_src2.arf
[Sat Nov 26 01:58:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:58:42 2011] Updating source flux to 2.4e-11