[Fri Aug  3 16:34:49 2012] Detection parameters:
  Position = (224.0, 301.4) = 12 37 41.11 62 12 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.4 +/- 16.3
  Background counts = 35.0
  Rate = 0.002 +/- 0.0003

[Fri Aug  3 16:34:49 2012] Off-axis axis estimate = 5.40'
[Fri Aug  3 19:25:52 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 19:25:52 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Fri Aug  3 19:25:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.888
[Fri Aug  3 19:25:52 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.13"
[Fri Aug  3 20:45:02 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_src19.ximg exists
[Fri Aug  3 20:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_src19.csv
[Fri Aug  3 20:45:02 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Aug  3 20:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_src19.csv
[Fri Aug  3 20:45:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:45:02 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Aug  3 20:45:02 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Aug  3 20:45:02 2012] Fit fullrun_mos2_xmm0111550401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Aug  3 20:45:35 2012] Spatial fit model total counts = 373.742000, observed total counts = 352.000000
[Fri Aug  3 20:45:35 2012] Offset between fit and detection position for source 23 = 0.098598 pixels
[Fri Aug  3 20:45:35 2012] 380.246800 total counts/ 287.708000 bgd. counts: snr = 5.455668
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.098598 pixels
  Position = (224.0, 301.5) = 12 37 41.08 62 12 0.5
  Extent = 4.2 (3.0-5.5)", rotation angle = 0
  Source counts = 92.5 +/- 19.5
  Background counts = 287.7
  Rate = 0.001 +/- 0.0002
[Fri Aug  3 20:45:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:45:35 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:45:35 2012] Source does appear to be extended
[Fri Aug  3 20:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 23:10:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 23:10:53 2012] Initial guess for spatial extent in simple fitting = 4.23"
[Fri Aug  3 23:10:53 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.692
[Fri Aug  3 23:10:53 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 4.23"
[Sat Aug  4 00:23:18 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_src19.ximg exists
[Sat Aug  4 00:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_src19.csv
[Sat Aug  4 00:23:18 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Aug  4 00:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_src19.csv
[Sat Aug  4 00:23:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 00:23:19 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Aug  4 00:23:19 2012] fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Aug  4 00:23:19 2012] Fit fullrun_mos2_xmm0111550401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Aug  4 00:23:54 2012] Spatial fit model total counts = 373.740000, observed total counts = 352.000000
[Sat Aug  4 00:23:54 2012] Offset between fit and detection position for source 23 = 0.000028 pixels
[Sat Aug  4 00:23:54 2012] 380.245500 total counts/ 287.711000 bgd. counts: snr = 5.455386
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.000028 pixels
  Position = (224.0, 301.5) = 12 37 41.08 62 12 0.5
  Extent = 4.2 (3.0-5.5)", rotation angle = 0
  Source counts = 92.5 +/- 19.5
  Background counts = 287.7
  Rate = 0.001 +/- 0.0002
[Sat Aug  4 00:23:54 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 00:23:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 00:23:54 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 00:23:54 2012] Source does appear to be extended
[Sat Aug  4 00:23:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 04:11:58 2012] XMMSAS src. selection expression = ellipse(19439.651679, 26182.188400, 253.686607, 253.686607, 0.000000, X, Y)
[Sat Aug  4 04:11:58 2012] Writing source region out to fullrun_mos2_xmm0111550401_pi300-10000_pass1_cl_src23_src.reg
[Sat Aug  4 04:11:58 2012] Extracting stamp from image fullrun_mos2_xmm0111550401_pi300-10000_cl_sm2.00.img.gz, (209, 287) - (239, 316)
[Sat Aug  4 04:11:58 2012] XMMSAS bgd. selection expression = annulus(19439.651679, 26182.188400, 422.811012, 845.622024, X, Y)
[Sat Aug  4 04:11:58 2012] Writing fullrun_mos2_xmm0111550401_pi300-10000_pass1_cl_src23.gif
[Sat Aug  4 04:17:55 2012] Mean detx,y = (5867.80, 2857.72) 
[Sat Aug  4 04:17:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 04:18:04 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 04:18:04 2012] Setting source spectrum file to fullrun_mos2_xmm0111550401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Aug  4 04:18:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111550401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Aug  4 04:55:43 2012] Not generating rmf since there are only 92 counts
[Sat Aug  4 04:55:43 2012] rmf not generated due to insufficient counts
[Sat Aug  4 05:16:09 2012] Updating aperture counts using extracted products
[Sat Aug  4 05:16:09 2012] Error reading totcts from fullrun_mos2_xmm0111550401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Aug  4 05:16:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 05:16:10 2012] Using photon index=1.80, rate=0.000997, arf fullrun_mos2_xmm0111550401_pi300-10000_pass1_cl_src23.arf
[Sat Aug  4 05:16:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 05:16:10 2012] Updating source flux to 2e-14
[Sat Aug  4 05:17:15 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting