[Wed Jul 11 12:28:38 2012] Detection parameters:
  Position = (182.8, 292.1) = 12 37 59.52 62 11 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1779.5 +/- 52.2
  Background counts = 65.2
  Rate = 0.04 +/- 0.001

[Wed Jul 11 12:28:39 2012] Off-axis axis estimate = 8.40'
[Wed Jul 11 12:31:48 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:31:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 12:31:48 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed Jul 11 12:31:48 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Wed Jul 11 12:31:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.63"
[Wed Jul 11 13:50:21 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 13:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 13:50:21 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 13:50:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 13:50:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 13:50:22 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 13:50:22 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 13:50:22 2012] Fit fullrun_pn_xmm0111550201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 15:16:14 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.335075 pixels away
[Wed Jul 11 15:16:14 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 15:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 15:16:14 2012] Assessing source extent using major
[Wed Jul 11 15:16:14 2012] Source does appear to be extended
[Wed Jul 11 15:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 15:16:35 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 15:16:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 15:16:35 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed Jul 11 15:16:35 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Wed Jul 11 15:16:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.63"
[Wed Jul 11 16:18:20 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 16:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 16:18:20 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 16:18:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 16:18:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 16:18:20 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 16:18:20 2012] fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 16:18:20 2012] Fit fullrun_pn_xmm0111550201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 17:44:14 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.902571 pixels away
[Wed Jul 11 17:44:15 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 17:44:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 17:44:15 2012] Assessing source extent using major
[Wed Jul 11 17:44:15 2012] Source does appear to be extended
[Wed Jul 11 17:44:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:44:38 2012] Counts = 1779.498535, rescaling region sizes by 2.000000
[Wed Jul 11 17:44:38 2012] XMMSAS src. selection expression = ellipse(15856.184845, 25362.673889, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 11 17:44:38 2012] Writing source region out to fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 17:44:38 2012] Extracting stamp from image fullrun_pn_xmm0111550201_pi300-10000_cl_sm2.00.img.gz, (108, 217) - (258, 367)
[Wed Jul 11 17:44:38 2012] XMMSAS bgd. selection expression = annulus(15856.184845, 25362.673889, 4350.000000, 8700.000000, X, Y) && !ellipse(15685.803650, 28425.560822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8029.803650, 23533.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23259.367645, 32558.307739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23834.492126, 31102.191437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21973.976364, 20819.217834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10936.150719, 17025.641617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16859.087646, 31899.411774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9405.437386, 24202.585388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18304.704636, 33944.238342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21882.480072, 33248.482605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.313000, 21747.848800, 386.432811, 386.432811, 0.000000, X, Y) && !ellipse(24418.933105, 29587.398987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23647.985000, 21608.934600, 312.465609, 312.465609, 0.000000, X, Y) && !ellipse(17911.863846, 20880.968506, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 17:44:38 2012] Writing fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 17:45:01 2012] Mean detx,y = (-8948.19, -4867.17) 
[Wed Jul 11 17:45:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 17:47:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 17:47:31 2012] Setting source spectrum file to fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 17:47:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 11 18:23:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 11 18:23:40 2012] rmf not generated due to insufficient counts
[Wed Jul 11 19:49:26 2012] Updating aperture counts using extracted products
[Wed Jul 11 19:49:26 2012] Error reading totcts from fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 19:49:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 19:49:26 2012] Using photon index=1.80, rate=0.0433, arf fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 11 19:49:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 19:49:26 2012] Updating source flux to 1.9e-13
[Wed Jul 11 19:50:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 11 19:51:11 2012] xmm0111550201/analysis//spectral/fullrun_pn_xmm0111550201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete