[Wed Jul  4 10:27:06 2012] Detection parameters:
  Position = (194.6, 370.9) = 12 37 52.43 62 16 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.7 +/- 14.5
  Background counts = 19.2
  Rate = 0.005 +/- 0.0006

[Wed Jul  4 10:27:07 2012] Off-axis axis estimate = 9.18'
[Wed Jul  4 12:26:10 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 12:26:10 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Wed Jul  4 12:26:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Wed Jul  4 12:26:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.02"
[Wed Jul  4 13:08:06 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jul  4 13:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_src7.csv
[Wed Jul  4 13:08:07 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jul  4 13:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_src7.csv
[Wed Jul  4 13:08:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 13:08:07 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul  4 13:08:07 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul  4 13:08:07 2012] Fit fullrun_mos2_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jul  4 13:08:26 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.987794 pixels away
[Wed Jul  4 13:08:27 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:08:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:08:27 2012] Assessing source extent using major
[Wed Jul  4 13:08:27 2012] Source does appear to be extended
[Wed Jul  4 13:08:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 14:49:34 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 14:49:34 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Wed Jul  4 14:49:34 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Wed Jul  4 14:49:34 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.02"
[Wed Jul  4 15:28:42 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jul  4 15:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_src7.csv
[Wed Jul  4 15:28:42 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jul  4 15:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_src7.csv
[Wed Jul  4 15:28:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 15:28:42 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jul  4 15:28:42 2012] fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jul  4 15:28:42 2012] Fit fullrun_mos2_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jul  4 15:29:00 2012] Spatial fit model total counts = 231.000000, observed total counts = 231.000000
[Wed Jul  4 15:29:00 2012] Offset between fit and detection position for source 17 = 0.203644 pixels
[Wed Jul  4 15:29:00 2012] 227.395500 total counts/ 141.690000 bgd. counts: snr = 7.200109
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.203644 pixels
  Position = (194.7, 371.0) = 12 37 52.32 62 16 31.3
  Extent = 6.4 (5.2-8.1)", rotation angle = 0
  Source counts = 85.7 +/- 15.1
  Background counts = 141.7
  Rate = 0.002 +/- 0.0003
[Wed Jul  4 15:29:00 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 15:29:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 15:29:00 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 15:29:00 2012] Source does appear to be extended
[Wed Jul  4 15:29:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 17:00:17 2012] XMMSAS src. selection expression = ellipse(16893.632400, 32227.539000, 385.962611, 385.962611, 0.000000, X, Y)
[Wed Jul  4 17:00:17 2012] Writing source region out to fullrun_mos2_xmm0111550101_pi300-10000_pass1_cl_src17_src.reg
[Wed Jul  4 17:00:17 2012] Extracting stamp from image fullrun_mos2_xmm0111550101_pi300-10000_cl_sm2.00.img.gz, (173, 349) - (217, 393)
[Wed Jul  4 17:00:17 2012] XMMSAS bgd. selection expression = annulus(16893.632400, 32227.539000, 643.271019, 1286.542037, X, Y) && !ellipse(18270.868942, 34288.911591, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 17:00:17 2012] Writing fullrun_mos2_xmm0111550101_pi300-10000_pass1_cl_src17.gif
[Wed Jul  4 17:01:16 2012] Mean detx,y = (3784.87, 9068.44) 
[Wed Jul  4 17:01:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 17:01:23 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 17:01:23 2012] Setting source spectrum file to fullrun_mos2_xmm0111550101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul  4 17:01:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111550101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jul  4 17:23:30 2012] Not generating rmf since there are only 85 counts
[Wed Jul  4 17:23:30 2012] rmf not generated due to insufficient counts
[Wed Jul  4 17:26:06 2012] Updating aperture counts using extracted products
[Wed Jul  4 17:26:06 2012] Error reading totcts from fullrun_mos2_xmm0111550101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul  4 17:26:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 17:26:07 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos2_xmm0111550101_pi300-10000_pass1_cl_src17.arf
[Wed Jul  4 17:26:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 17:26:07 2012] Updating source flux to 4.4e-14
[Wed Jul  4 17:26:29 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting