[Wed Jul  4 10:26:40 2012] Detection parameters:
  Position = (216.0, 432.9) = 12 37 39.20 62 21 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.7 +/- 15.8
  Background counts = 15.8
  Rate = 0.003 +/- 0.0003

[Wed Jul  4 10:26:40 2012] Off-axis axis estimate = 11.43'
[Wed Jul  4 11:45:32 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:45:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 11:45:32 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Wed Jul  4 11:45:32 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Wed Jul  4 11:45:32 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.15"
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jul  4 12:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src11.csv
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jul  4 12:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src11.csv
[Wed Jul  4 12:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jul  4 12:26:09 2012] Fit fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jul  4 13:08:22 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.998365 pixels away
[Wed Jul  4 13:08:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:08:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:08:22 2012] Assessing source extent using major
[Wed Jul  4 13:08:22 2012] Source does appear to be extended
[Wed Jul  4 13:08:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 14:12:12 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 14:12:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 14:12:12 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Wed Jul  4 14:12:12 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Wed Jul  4 14:12:12 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.15"
[Wed Jul  4 14:49:33 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jul  4 14:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src11.csv
[Wed Jul  4 14:49:33 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jul  4 14:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src11.csv
[Wed Jul  4 14:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 14:49:34 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jul  4 14:49:34 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jul  4 14:49:34 2012] Fit fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jul  4 15:28:55 2012] Spatial fit model total counts = 239.999000, observed total counts = 240.000000
[Wed Jul  4 15:28:55 2012] Offset between fit and detection position for source 6 = 0.406923 pixels
[Wed Jul  4 15:28:55 2012] 241.123700 total counts/ 155.139000 bgd. counts: snr = 6.903363
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.406923 pixels
  Position = (215.6, 432.8) = 12 37 39.45 62 21 0.3
  Extent = 5.4 (3.7-7.3)", rotation angle = 0
  Source counts = 86.0 +/- 15.5
  Background counts = 155.1
  Rate = 0.002 +/- 0.0004
[Wed Jul  4 15:28:55 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 15:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 15:28:55 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 15:28:55 2012] Source does appear to be extended
[Wed Jul  4 15:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 16:38:00 2012] XMMSAS src. selection expression = ellipse(18708.498980, 37601.199600, 325.611609, 325.611609, 0.000000, X, Y)
[Wed Jul  4 16:38:00 2012] Writing source region out to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul  4 16:38:00 2012] Extracting stamp from image fullrun_mos1_xmm0111550101_pi300-10000_cl_sm2.00.img.gz, (197, 414) - (234, 451)
[Wed Jul  4 16:38:00 2012] XMMSAS bgd. selection expression = annulus(18708.498980, 37601.199600, 542.686016, 1085.372031, X, Y)
[Wed Jul  4 16:38:00 2012] Writing fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src6.gif
[Wed Jul  4 16:40:35 2012] Mean detx,y = (12114.87, 1024.10) 
[Wed Jul  4 16:40:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 16:40:43 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 16:40:43 2012] Setting source spectrum file to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 16:40:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul  4 16:58:25 2012] Not generating rmf since there are only 85 counts
[Wed Jul  4 16:58:25 2012] rmf not generated due to insufficient counts
[Wed Jul  4 17:26:05 2012] Updating aperture counts using extracted products
[Wed Jul  4 17:26:05 2012] Error reading totcts from fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul  4 17:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 17:26:06 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src6.arf
[Wed Jul  4 17:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 17:26:06 2012] Updating source flux to 5e-14
[Wed Jul  4 17:26:08 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting