[Wed Jul  4 10:26:40 2012] Detection parameters:
  Position = (445.1, 239.7) = 12 35 16.73 62 6 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.3 +/- 11.3
  Background counts = 15.4
  Rate = 0.001 +/- 0.0002

[Wed Jul  4 10:26:40 2012] Off-axis axis estimate = 11.46'
[Wed Jul  4 11:45:32 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:45:32 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Wed Jul  4 11:45:32 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Wed Jul  4 11:45:32 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 12.16"
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src31.ximg exists
[Wed Jul  4 12:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src31.csv
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Jul  4 12:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src31.csv
[Wed Jul  4 12:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 12:26:10 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Jul  4 12:26:10 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Jul  4 12:26:10 2012] Fit fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Jul  4 13:08:22 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.564395 pixels away
[Wed Jul  4 13:08:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:08:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:08:22 2012] Assessing source extent using major
[Wed Jul  4 13:08:22 2012] Source does appear to be extended
[Wed Jul  4 13:08:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 14:12:12 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 14:12:12 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Wed Jul  4 14:12:12 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.967
[Wed Jul  4 14:12:12 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 12.16"
[Wed Jul  4 14:49:33 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src31.ximg exists
[Wed Jul  4 14:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src31.csv
[Wed Jul  4 14:49:33 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Jul  4 14:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src31.csv
[Wed Jul  4 14:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 14:49:34 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Jul  4 14:49:34 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Jul  4 14:49:34 2012] Fit fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Jul  4 15:28:55 2012] Spatial fit model total counts = 162.000000, observed total counts = 162.000000
[Wed Jul  4 15:28:55 2012] Offset between fit and detection position for source 31 = 0.432020 pixels
[Wed Jul  4 15:28:55 2012] 158.264800 total counts/ 114.589000 bgd. counts: snr = 4.080087
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.432020 pixels
  Position = (445.5, 239.9) = 12 35 16.51 62 7 0.3
  Extent = 6.7 (5.2-9.4)", rotation angle = 0
  Source counts = 43.7 +/- 12.6
  Background counts = 114.6
  Rate = 0.001 +/- 0.0003
[Wed Jul  4 15:28:55 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 15:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 15:28:55 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 15:28:55 2012] Source does appear to be extended
[Wed Jul  4 15:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 16:38:00 2012] XMMSAS src. selection expression = ellipse(38706.364800, 20826.714000, 403.773612, 403.773612, 0.000000, X, Y)
[Wed Jul  4 16:38:00 2012] Writing source region out to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src31_src.reg
[Wed Jul  4 16:38:00 2012] Extracting stamp from image fullrun_mos1_xmm0111550101_pi300-10000_cl_sm2.00.img.gz, (422, 217) - (469, 263)
[Wed Jul  4 16:38:00 2012] XMMSAS bgd. selection expression = annulus(38706.364800, 20826.714000, 672.956019, 1345.912039, X, Y)
[Wed Jul  4 16:38:00 2012] Writing fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src31.gif
[Wed Jul  4 16:44:39 2012] Mean detx,y = (-13722.52, 4795.24) 
[Wed Jul  4 16:44:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 16:44:50 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 16:44:50 2012] Setting source spectrum file to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Jul  4 16:44:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Jul  4 17:00:10 2012] Not generating rmf since there are only 43 counts
[Wed Jul  4 17:00:10 2012] rmf not generated due to insufficient counts
[Wed Jul  4 17:26:06 2012] Updating aperture counts using extracted products
[Wed Jul  4 17:26:06 2012] Error reading totcts from fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Jul  4 17:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 17:26:06 2012] Using photon index=1.80, rate=0.001, arf fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src31.arf
[Wed Jul  4 17:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 17:26:06 2012] Updating source flux to 2.6e-14
[Wed Jul  4 17:26:08 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting