[Wed Jul  4 10:26:40 2012] Detection parameters:
  Position = (252.2, 385.4) = 12 37 16.51 62 17 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 10.7
  Background counts = 20.2
  Rate = 0.002 +/- 0.0003

[Wed Jul  4 10:26:40 2012] Off-axis axis estimate = 7.14'
[Wed Jul  4 11:45:32 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 11:45:32 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Wed Jul  4 11:45:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.862
[Wed Jul  4 11:45:32 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.00"
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src24.ximg exists
[Wed Jul  4 12:26:09 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Jul  4 12:26:09 2012] Fit fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_src24 appears to have run properly
[Wed Jul  4 12:26:10 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Jul  4 12:26:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Jul  4 12:26:10 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Jul  4 12:26:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Jul  4 12:26:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 13:08:22 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.319655 pixels away
[Wed Jul  4 13:08:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 13:08:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 13:08:22 2012] Assessing source extent using major
[Wed Jul  4 13:08:22 2012] Source does appear to be extended
[Wed Jul  4 13:08:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 14:12:12 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 14:12:12 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Wed Jul  4 14:12:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.862
[Wed Jul  4 14:12:12 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 10.00"
[Wed Jul  4 14:49:33 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jul  4 14:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src24.csv
[Wed Jul  4 14:49:33 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jul  4 14:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src24.csv
[Wed Jul  4 14:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 14:49:34 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jul  4 14:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jul  4 14:49:34 2012] fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jul  4 14:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jul  4 14:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111550101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 15:28:55 2012] Spatial fit model total counts = 190.034000, observed total counts = 171.000000
[Wed Jul  4 15:28:55 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  4 15:28:55 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 15:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 15:28:55 2012] Assessing source extent using major
[Wed Jul  4 15:28:55 2012] Source does appear to be extended
[Wed Jul  4 15:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 16:38:00 2012] XMMSAS src. selection expression = ellipse(21894.037415, 33477.409851, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul  4 16:38:00 2012] Writing source region out to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src18_src.reg
[Wed Jul  4 16:38:00 2012] Extracting stamp from image fullrun_mos1_xmm0111550101_pi300-10000_cl_sm2.00.img.gz, (215, 348) - (290, 423)
[Wed Jul  4 16:38:00 2012] XMMSAS bgd. selection expression = annulus(21894.037415, 33477.409851, 1087.500000, 2175.000000, X, Y) && !ellipse(23255.458520, 32843.680600, 378.431211, 378.431211, 0.000000, X, Y) && !ellipse(21681.296444, 35133.606656, 534.164536, 408.166465, -0.000000, X, Y)
[Wed Jul  4 16:38:00 2012] Writing fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src18.gif
[Wed Jul  4 16:43:18 2012] Mean detx,y = (6975.86, 576.96) 
[Wed Jul  4 16:43:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 16:43:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 16:43:35 2012] Setting source spectrum file to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jul  4 16:43:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Jul  4 16:59:27 2012] Not generating rmf since there are only 56 counts
[Wed Jul  4 16:59:27 2012] rmf not generated due to insufficient counts
[Wed Jul  4 17:26:06 2012] Updating aperture counts using extracted products
[Wed Jul  4 17:26:06 2012] Error reading totcts from fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jul  4 17:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 17:26:06 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0111550101_pi300-10000_pass1_cl_src18.arf
[Wed Jul  4 17:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 17:26:06 2012] Updating source flux to 2.8e-14
[Wed Jul  4 17:26:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting