[Tue Jun 12 20:18:13 2012] Detection parameters:
  Position = (279.3, 291.9) = 14 39 13.86 64 18 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.3 +/- 18.6
  Background counts = 44.2
  Rate = 0.002 +/- 0.0004

[Tue Jun 12 20:18:13 2012] Off-axis axis estimate = 1.47'
[Tue Jun 12 20:22:08 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 20:22:08 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Tue Jun 12 20:22:08 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Tue Jun 12 20:22:08 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.16"
[Tue Jun 12 21:15:05 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jun 12 21:15:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_src19.csv
[Tue Jun 12 21:15:05 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jun 12 21:15:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_src19.csv
[Tue Jun 12 21:15:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 21:15:06 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jun 12 21:15:06 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jun 12 21:15:06 2012] Fit fullrun_pn_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jun 12 22:59:13 2012] Spatial fit model total counts = 1319.350000, observed total counts = 1316.000000
[Tue Jun 12 22:59:13 2012] Offset between fit and detection position for source 20 = 7.115385 pixels
[Tue Jun 12 22:59:13 2012] 1337.392000 total counts/ 1120.890000 bgd. counts: snr = 6.466666
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 7.115385 pixels
  Position = (274.1, 296.8) = 14 39 17.33 64 19 2.3
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 216.5 +/- 36.6
  Background counts = 1120.9
  Rate = 0.004 +/- 0.0007
[Tue Jun 12 22:59:13 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 22:59:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 22:59:13 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 22:59:13 2012] Source does appear to be extended
[Tue Jun 12 22:59:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 22:59:13 2012] Source is confused with source 19
[Tue Jun 12 22:59:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 22:59:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 22:59:32 2012] Initial guess for spatial extent in simple fitting = 14.32"
[Tue Jun 12 22:59:32 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.112
[Tue Jun 12 22:59:32 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.32"
[Wed Jun 13 00:11:37 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jun 13 00:11:37 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jun 13 00:11:37 2012] Fit fullrun_pn_xmm0111530101_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Jun 13 00:11:38 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jun 13 00:11:38 2012] fullrun_pn_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jun 13 00:11:38 2012] Fit fullrun_pn_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jun 13 01:01:21 2012] Source 20 is offset by -5.965356 and -4.746874 pixels which is larger than
2 X fitted extent = 2.123352 x 2.123352, not incorporating fit results
[Wed Jun 13 01:01:21 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 01:01:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 01:01:21 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 01:01:21 2012] Source does appear to be extended
[Wed Jun 13 01:01:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 01:01:35 2012] XMMSAS src. selection expression = ellipse(23800.258000, 25772.804000, 859.392025, 859.392025, 0.000000, X, Y)
[Wed Jun 13 01:01:35 2012] Writing source region out to fullrun_pn_xmm0111530101_pi300-10000_pass1_cl_src20_src.reg
[Wed Jun 13 01:01:35 2012] Extracting stamp from image fullrun_pn_xmm0111530101_pi300-10000_cl_sm2.00.img.gz, (225, 247) - (324, 346)
[Wed Jun 13 01:01:35 2012] XMMSAS bgd. selection expression = annulus(23800.258000, 25772.804000, 1432.320041, 2864.640082, X, Y) && !ellipse(25997.190600, 23894.435200, 1565.352045, 1494.993643, 328.261000, X, Y) && !ellipse(24504.228577, 29074.779205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.407867, 29481.781921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.850220, 28832.742600, 497.309614, 497.309614, 0.000000, X, Y) && !ellipse(24321.272340, 26187.837600, 396.840011, 396.840011, 0.000000, X, Y) && !ellipse(23136.596000, 24806.886000, 1237.416036, 1237.416036, 0.000000, X, Y) && !ellipse(24215.751070, 23663.788827, 1227.392035, 449.672523, 190.853295, X, Y) && !ellipse(21579.600967, 23014.308441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27403.480000, 23438.622000, 1232.200035, 1232.200035, 0.000000, X, Y)
[Wed Jun 13 01:01:35 2012] Writing fullrun_pn_xmm0111530101_pi300-10000_pass1_cl_src20.gif
[Wed Jun 13 01:16:00 2012] Mean detx,y = (515.67, 2628.07) 
[Wed Jun 13 01:16:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 01:16:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 01:16:29 2012] Setting source spectrum file to fullrun_pn_xmm0111530101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jun 13 01:16:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111530101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jun 13 05:42:04 2012] Updating aperture counts using extracted products
[Wed Jun 13 05:42:04 2012] Error reading totcts from fullrun_pn_xmm0111530101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jun 13 05:42:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 05:42:04 2012] Using photon index=1.80, rate=0.00433, arf fullrun_pn_xmm0111530101_pi300-10000_pass1_cl_src20.arf
[Wed Jun 13 05:42:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 05:42:04 2012] Updating source flux to 1.4e-14
[Wed Jun 13 05:43:11 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Wed Jun 13 05:43:11 2012] Flag c found in src. 20 procflags, skipping spectral fitting