[Tue Jun 12 20:19:00 2012] Detection parameters:
  Position = (234.3, 205.1) = 14 39 43.80 64 12 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.2 +/- 15.6
  Background counts = 10.4
  Rate = 0.005 +/- 0.0005

[Tue Jun 12 20:19:00 2012] Off-axis axis estimate = 8.21'
[Tue Jun 12 22:10:54 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 22:10:54 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Tue Jun 12 22:10:54 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Tue Jun 12 22:10:54 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.53"
[Tue Jun 12 22:59:04 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 12 22:59:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_src5.csv
[Tue Jun 12 22:59:04 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 12 22:59:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_src5.csv
[Tue Jun 12 22:59:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 22:59:04 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 12 22:59:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 12 22:59:04 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 12 22:59:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jun 12 22:59:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 22:59:24 2012] Spatial fit model total counts = -588.582000, observed total counts = 235.000000
[Tue Jun 12 22:59:24 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 22:59:24 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 22:59:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 22:59:24 2012] Assessing source extent using major
[Tue Jun 12 22:59:24 2012] Source does appear to be extended
[Tue Jun 12 22:59:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 00:42:02 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 00:42:02 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Wed Jun 13 00:42:02 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Wed Jun 13 00:42:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.53"
[Wed Jun 13 01:01:16 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 13 01:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_src5.csv
[Wed Jun 13 01:01:16 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 13 01:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_src5.csv
[Wed Jun 13 01:01:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 01:01:16 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 13 01:01:16 2012] fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 13 01:01:16 2012] Fit fullrun_mos2_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jun 13 01:01:27 2012] Spatial fit model total counts = 251.547000, observed total counts = 235.000000
[Wed Jun 13 01:01:27 2012] Offset between fit and detection position for source 20 = 0.089592 pixels
[Wed Jun 13 01:01:27 2012] 259.164400 total counts/ 160.673000 bgd. counts: snr = 7.770104
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.089592 pixels
  Position = (234.4, 205.1) = 14 39 43.74 64 12 23.0
  Extent = 4.0 (3.3-4.8)", rotation angle = 0
  Source counts = 98.5 +/- 16.1
  Background counts = 160.7
  Rate = 0.002 +/- 0.0003
[Wed Jun 13 01:01:27 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 01:01:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 01:01:27 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 01:01:27 2012] Source does appear to be extended
[Wed Jun 13 01:01:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 05:22:50 2012] XMMSAS src. selection expression = ellipse(20344.262400, 17793.838200, 238.264807, 238.264807, 0.000000, X, Y)
[Wed Jun 13 05:22:50 2012] Writing source region out to fullrun_mos2_xmm0111530101_pi300-10000_pass1_cl_src20_src.reg
[Wed Jun 13 05:22:50 2012] Extracting stamp from image fullrun_mos2_xmm0111530101_pi300-10000_cl_sm2.00.img.gz, (221, 191) - (248, 219)
[Wed Jun 13 05:22:50 2012] XMMSAS bgd. selection expression = annulus(20344.262400, 17793.838200, 397.108011, 794.216023, X, Y)
[Wed Jun 13 05:22:50 2012] Writing fullrun_mos2_xmm0111530101_pi300-10000_pass1_cl_src20.gif
[Wed Jun 13 05:26:12 2012] Mean detx,y = (-8266.53, 1123.35) 
[Wed Jun 13 05:26:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 05:26:18 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 05:26:18 2012] Setting source spectrum file to fullrun_mos2_xmm0111530101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jun 13 05:26:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111530101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jun 13 05:35:34 2012] Not generating rmf since there are only 98 counts
[Wed Jun 13 05:35:34 2012] rmf not generated due to insufficient counts
[Wed Jun 13 05:42:05 2012] Updating aperture counts using extracted products
[Wed Jun 13 05:42:05 2012] Error reading totcts from fullrun_mos2_xmm0111530101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jun 13 05:42:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 05:42:05 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0111530101_pi300-10000_pass1_cl_src20.arf
[Wed Jun 13 05:42:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 05:42:05 2012] Updating source flux to 4.6e-14
[Wed Jun 13 05:42:46 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Wed Jun 13 05:42:46 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting