[Tue Jun 12 20:18:36 2012] Detection parameters:
  Position = (280.2, 301.3) = 14 39 13.24 64 19 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.0 +/- 14.1
  Background counts = 14.5
  Rate = 0.002 +/- 0.0003

[Tue Jun 12 20:18:36 2012] Off-axis axis estimate = 1.34'
[Tue Jun 12 21:15:06 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 21:15:06 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue Jun 12 21:15:06 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Tue Jun 12 21:15:06 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.10"
[Tue Jun 12 22:10:53 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jun 12 22:10:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src13.csv
[Tue Jun 12 22:10:53 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jun 12 22:10:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src13.csv
[Tue Jun 12 22:10:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 22:10:53 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jun 12 22:10:53 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jun 12 22:10:53 2012] Fit fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jun 12 22:59:19 2012] Source 27 is offset by -6.289631 and 5.341192 pixels which is larger than
2 X fitted extent = 0.816260 x 0.816260, not incorporating fit results
[Tue Jun 12 22:59:19 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 22:59:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 22:59:19 2012] Assessing source extent using major
[Tue Jun 12 22:59:19 2012] Source does appear to be extended
[Tue Jun 12 22:59:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 00:11:38 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 00:11:38 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Wed Jun 13 00:11:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Wed Jun 13 00:11:38 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.10"
[Wed Jun 13 00:42:01 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src12.ximg exists
[Wed Jun 13 00:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src12.csv
[Wed Jun 13 00:42:02 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Jun 13 00:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src12.csv
[Wed Jun 13 00:42:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 00:42:02 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Jun 13 00:42:02 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Jun 13 00:42:02 2012] Fit fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Jun 13 01:01:25 2012] Source 27 is offset by -6.289631 and 5.237790 pixels which is larger than
2 X fitted extent = 0.828239 x 0.828239, not incorporating fit results
[Wed Jun 13 01:01:25 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 39.823192 pixels away
[Wed Jun 13 01:01:25 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 01:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 01:01:25 2012] Assessing source extent using major
[Wed Jun 13 01:01:25 2012] Source does appear to be extended
[Wed Jun 13 01:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 04:52:00 2012] XMMSAS src. selection expression = ellipse(24332.010101, 26162.599701, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 04:52:00 2012] Writing source region out to fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src27_src.reg
[Wed Jun 13 04:52:00 2012] Extracting stamp from image fullrun_mos1_xmm0111530101_pi300-10000_cl_sm2.00.img.gz, (243, 264) - (318, 339)
[Wed Jun 13 04:52:00 2012] XMMSAS bgd. selection expression = annulus(24332.010101, 26162.599701, 1087.500000, 2175.000000, X, Y) && !ellipse(25986.996400, 23889.371200, 1442.973642, 1442.973642, 0.000000, X, Y)
[Wed Jun 13 04:52:00 2012] Writing fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src27.gif
[Wed Jun 13 04:57:22 2012] Mean detx,y = (-2587.29, -300.65) 
[Wed Jun 13 04:57:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 04:57:32 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 04:57:32 2012] Setting source spectrum file to fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun 13 04:57:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jun 13 05:22:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 05:22:23 2012] rmf not generated due to insufficient counts
[Wed Jun 13 05:42:05 2012] Updating aperture counts using extracted products
[Wed Jun 13 05:42:05 2012] Error reading totcts from fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun 13 05:42:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 05:42:05 2012] Using photon index=1.80, rate=0.0021, arf fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src27.arf
[Wed Jun 13 05:42:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 05:42:05 2012] Updating source flux to 2.6e-14
[Wed Jun 13 05:42:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting