[Tue Jun 12 20:18:36 2012] Detection parameters:
  Position = (299.2, 275.1) = 14 39 0.55 64 17 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57279.4 +/- 287.4
  Background counts = 12.7
  Rate = 1 +/- 0.006

[Tue Jun 12 20:18:36 2012] Off-axis axis estimate = 1.70'
[Tue Jun 12 21:15:06 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 21:15:06 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jun 12 21:15:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Jun 12 21:15:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jun 12 22:10:52 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 22:10:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 22:10:52 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 22:10:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 22:10:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 22:10:53 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 22:10:53 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 22:10:53 2012] Fit fullrun_mos1_xmm0111530101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 22:59:19 2012] Spatial fit model total counts = 51401.900000, observed total counts = 51402.000000
[Tue Jun 12 22:59:19 2012] Offset between fit and detection position for source 2 = 0.097980 pixels
[Tue Jun 12 22:59:19 2012] 51577.500000 total counts/ 10879.100000 bgd. counts: snr = 390.194238
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.097980 pixels
  Position = (299.3, 275.1) = 14 39 0.51 64 17 28.2
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 40698.4 +/- 227.1
  Background counts = 10879.1
  Rate = 0.8 +/- 0.004
[Tue Jun 12 22:59:19 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 22:59:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 22:59:19 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 22:59:19 2012] Source does appear to be extended
[Tue Jun 12 22:59:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 00:11:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 00:11:38 2012] Initial guess for spatial extent in simple fitting = 6.01"
[Wed Jun 13 00:11:38 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.129
[Wed Jun 13 00:11:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.01"
[Wed Jun 13 00:42:01 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 00:42:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 00:42:01 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 00:42:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 00:42:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 00:42:02 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 00:42:02 2012] fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 00:42:02 2012] Fit fullrun_mos1_xmm0111530101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 01:01:25 2012] Spatial fit model total counts = 51401.900000, observed total counts = 51402.000000
[Wed Jun 13 01:01:25 2012] Offset between fit and detection position for source 2 = 0.000000 pixels
[Wed Jun 13 01:01:25 2012] 51577.400000 total counts/ 10879.000000 bgd. counts: snr = 390.196031
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000000 pixels
  Position = (299.3, 275.1) = 14 39 0.51 64 17 28.2
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 40698.4 +/- 227.1
  Background counts = 10879.0
  Rate = 0.8 +/- 0.004
[Wed Jun 13 01:01:25 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 01:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 01:01:25 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 01:01:25 2012] Source does appear to be extended
[Wed Jun 13 01:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 04:52:00 2012] Counts = 40698.400000, rescaling region sizes by 3.000000
[Wed Jun 13 04:52:00 2012] XMMSAS src. selection expression = ellipse(25986.996400, 23889.371200, 1082.230231, 1082.230231, 0.000000, X, Y)
[Wed Jun 13 04:52:00 2012] Writing source region out to fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 13 04:52:00 2012] Extracting stamp from image fullrun_mos1_xmm0111530101_pi300-10000_cl_sm2.00.img.gz, (237, 213) - (361, 337)
[Wed Jun 13 04:52:00 2012] XMMSAS bgd. selection expression = annulus(25986.996400, 23889.371200, 5411.151156, 10822.302311, X, Y) && !ellipse(23032.588318, 13965.692474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30920.801400, 26917.416800, 385.140811, 385.140811, 0.000000, X, Y) && !ellipse(24548.824600, 29253.886200, 574.060017, 574.060017, 0.000000, X, Y) && !ellipse(15528.243591, 28983.929413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30358.446045, 18715.534576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20356.633000, 17825.794000, 407.213612, 407.213612, 0.000000, X, Y) && !ellipse(28618.923200, 32760.834200, 438.440013, 438.440013, 0.000000, X, Y) && !ellipse(32847.979660, 23571.967800, 479.949614, 479.949614, 0.000000, X, Y) && !ellipse(24332.010101, 26162.599701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.675600, 23189.287200, 320.998409, 320.998409, 0.000000, X, Y) && !ellipse(21515.165280, 23049.474600, 494.698414, 494.698414, 0.000000, X, Y) && !ellipse(25527.925568, 22414.324921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31458.006420, 15204.348200, 1009.392029, 1009.392029, 0.000000, X, Y)
[Wed Jun 13 04:52:00 2012] Writing fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2.gif
[Wed Jun 13 04:52:07 2012] Mean detx,y = (191.61, -131.34) 
[Wed Jun 13 04:52:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 04:55:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 04:55:29 2012] Setting source spectrum file to fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 04:55:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 13 05:42:05 2012] Updating aperture counts using extracted products
[Wed Jun 13 05:42:05 2012] Error reading totcts from fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 05:42:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 05:42:05 2012] Using photon index=1.80, rate=0.782, arf fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 05:42:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 05:42:05 2012] Updating source flux to 8.6e-12
[Wed Jun 13 05:42:46 2012] Reading fit data from xmm0111530101/analysis//spectral/fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jun 13 05:42:46 2012] Spectral fit parameter nH value = 5.37434e+21
[Wed Jun 13 05:42:46 2012] Spectral fit parameter PhoIndex value = 5.69614
[Wed Jun 13 05:42:46 2012] Failed to get F(0.3-8.0) from xmm0111530101/analysis//spectral/fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 05:42:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 05:42:46 2012] Using Nh = 5.4e+21, photon index=5.70, rate=0.782, arf fullrun_mos1_xmm0111530101_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 05:42:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 05:42:46 2012] Updating source flux to 5.2e-12