[Mon Jul 23 05:07:12 2012] Detection parameters:
  Position = (312.4, 317.7) = 16 14 40.77 33 51 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27017.8 +/- 190.7
  Background counts = 16.4
  Rate = 8 +/- 0.06

[Mon Jul 23 05:07:12 2012] Off-axis axis estimate = 1.73'
[Mon Jul 23 05:11:08 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 05:11:08 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 05:11:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 23, frac = 1.214
[Mon Jul 23 05:11:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Jul 23 05:18:06 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 05:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 05:18:06 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 05:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 05:18:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:18:06 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 05:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 05:18:06 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 05:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 05:18:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111470101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:18:07 2012] Spatial fit model total counts = 22609.500000, observed total counts = 20286.000000
[Mon Jul 23 05:18:07 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 05:18:07 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 05:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 05:18:07 2012] Assessing source extent using major
[Mon Jul 23 05:18:07 2012] Source does appear to be extended
[Mon Jul 23 05:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:21:39 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 05:21:39 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 05:21:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 23, frac = 1.214
[Mon Jul 23 05:21:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Mon Jul 23 05:25:32 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 05:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 05:25:32 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 05:25:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 05:25:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 05:25:32 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 05:25:32 2012] fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 05:25:32 2012] Fit fullrun_mos2_xmm0111470101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 05:25:34 2012] Spatial fit model total counts = 21504.800000, observed total counts = 20286.000000
[Mon Jul 23 05:25:34 2012] Offset between fit and detection position for source 3 = 0.147576 pixels
[Mon Jul 23 05:25:34 2012] 21473.800000 total counts/ 3924.800000 bgd. counts: snr = 280.119672
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.147576 pixels
  Position = (312.3, 317.6) = 16 14 40.81 33 51 30.6
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 17549.0 +/- 146.5
  Background counts = 3924.8
  Rate = 1e+01 +/- 0.08
[Mon Jul 23 05:25:34 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 05:25:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 05:25:34 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 05:25:34 2012] Source does appear to be extended
[Mon Jul 23 05:25:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 05:26:03 2012] Counts = 17549.000000, rescaling region sizes by 3.000000
[Mon Jul 23 05:26:03 2012] XMMSAS src. selection expression = ellipse(27122.969800, 27582.752600, 1050.021030, 1050.021030, 0.000000, X, Y)
[Mon Jul 23 05:26:03 2012] Writing source region out to fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul 23 05:26:03 2012] Extracting stamp from image fullrun_mos2_xmm0111470101_pi300-10000_cl_sm2.00.img.gz, (252, 257) - (373, 378)
[Mon Jul 23 05:26:03 2012] XMMSAS bgd. selection expression = annulus(27122.969800, 27582.752600, 5250.105151, 10500.210302, X, Y)
[Mon Jul 23 05:26:03 2012] Writing fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3.gif
[Mon Jul 23 05:26:05 2012] Mean detx,y = (-222.57, -162.60) 
[Mon Jul 23 05:26:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 05:29:50 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 05:29:51 2012] Setting source spectrum file to fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 23 05:29:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul 23 05:33:44 2012] Updating aperture counts using extracted products
[Mon Jul 23 05:33:44 2012] Error reading totcts from fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 23 05:33:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 05:33:44 2012] Using photon index=1.80, rate=9.7, arf fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3.arf
[Mon Jul 23 05:33:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 05:33:44 2012] Updating source flux to 1e-10
[Mon Jul 23 05:33:46 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Mon Jul 23 05:34:04 2012] Reading fit data from xmm0111470101/analysis//spectral/fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3_pl.csv
[Mon Jul 23 05:34:04 2012] Spectral fit parameter nH value = 5.21318e+21
[Mon Jul 23 05:34:04 2012] Spectral fit parameter PhoIndex value = 5.40158
[Mon Jul 23 05:34:04 2012] Failed to get F(0.3-8.0) from xmm0111470101/analysis//spectral/fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 05:34:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 05:34:04 2012] Using Nh = 5.2e+21, photon index=5.40, rate=9.7, arf fullrun_mos2_xmm0111470101_pi300-10000_pass1_cl_src3.arf
[Mon Jul 23 05:34:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 05:34:04 2012] Updating source flux to 6.2e-11