[Thu Jun  7 10:30:39 2012] Detection parameters:
  Position = (161.5, 405.6) = 22 47 38.34 44 28 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.5 +/- 12.3
  Background counts = 21.6
  Rate = 0.002 +/- 0.0004

[Thu Jun  7 10:30:40 2012] Off-axis axis estimate = 12.61'
[Thu Jun  7 12:52:32 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 12:52:32 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Thu Jun  7 12:52:32 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.043
[Thu Jun  7 12:52:32 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.73"
[Thu Jun  7 13:47:17 2012] fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun  7 13:47:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_src15.csv
[Thu Jun  7 13:47:17 2012] fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun  7 13:47:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_src15.csv
[Thu Jun  7 13:47:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 13:47:18 2012] fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun  7 13:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun  7 13:47:18 2012] fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun  7 13:47:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun  7 13:47:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111450101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 13:47:32 2012] Spatial fit model total counts = 246.824000, observed total counts = 220.000000
[Thu Jun  7 13:47:32 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  7 13:47:32 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 13:47:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 13:47:32 2012] Assessing source extent using major
[Thu Jun  7 13:47:32 2012] Source does appear to be extended
[Thu Jun  7 13:47:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 13:47:32 2012] Deleting source due to low Poisson probability 0.8