[Thu May  2 02:54:13 2013] Detection parameters:
  Position = (315.9, 294.0) = 10 19 32.65 19 50 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.8 +/- 31.8
  Background counts = 262.3
  Rate = 0.01 +/- 0.001

[Thu May  2 02:54:13 2013] Off-axis axis estimate = 1.31'
[Thu May  2 02:54:29 2013] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Thu May  2 02:54:29 2013] Initial guess for spatial extent in simple fitting = 7.08"
[Thu May  2 02:54:29 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.883
[Thu May  2 02:54:29 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.08"
[Thu May  2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May  2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src3.csv
[Thu May  2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May  2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src3.csv
[Thu May  2 03:06:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May  2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  2 03:06:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:05:37 2013] Spatial fit model total counts = 5.824830, observed total counts = 8.000000
[Thu May  2 04:05:37 2013] Offset between fit and detection position for source 3 = 4.280311 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.280311 pixels
  Position = (314.0, 297.8) = 10 19 33.25 19 50 34.4
  Extent = 14.2 (14.2-14.2)", rotation angle = 0
  Source counts = 4.7 +/- 2.2
  Background counts = 0.0
  Rate = 0.07 +/- 0.03
 Deleting source due to low signal-to-noise ratio